Housing And Camera Setup; Step 1 - Attach Tray And Handle To The Housing - Ikelite 6146.02 Instruction Manual

Housing and Camera Setup

STEP 1 - Attach Tray and Handle to the Housing

Using a 9/16" open/box end or socket Wrench (not supplied), firmly
tighten the External Tray and Spacer to the Housing Base using the two
3/8-16 Nuts supplied in the accessory package. One side of the Spacer
has an adhesive backing. Remove the Protective Film to adhere the
Spacer to the Tray.
Note: Tray and Handle may be attached before or after the camera is
secured in the Housing. We recommend attaching it immediately to avoid
scratching table tops with the Tray Mounting Bolts.
Tray Mounting Bolt
Spacer
Protective Film
MADE IN USA
3/8-16 Nut
Wrench - not supplied
External Tray
& Handle
7