Housing and Camera Setup
STEP 1 - Remove/Attach Tray and Handle
The Tray and Handle may be removed for transport and then re-attached
for housing use. We recommend leaving the Tray and Handle attached
whenever possible to avoid accidentally scratching table tops or other
surfaces with the Tray Mounting Bolts.
To remove, loosen both 3/8-16 Nuts using a 9/16" open/box end or
socket Wrench (not supplied).
External Tray & Handle
Tray Mounting Bolt
Washer
MADE IN USA
3/8-16 Nut
Wrench - not supplied
7