Attaching a Sync Cord to the Housing -
Ikelite TTL
Sync Cord
Knurled Nut
Sync Cord Pin
Using Strobes with a Fiber Optic Connection
Two ports on the front of the housing above the lens port are provided
for the connection of up to two Ikelite, SEA&SEA, or Olympus-type fiber
optic cords. The housing's built-in TTL circuitry will not be operable when
external strobes are attached via fiber optic cord.
Always install the Flash Deflector when using external strobes, Page 17.
16
Diagram C
Sync Cord O-ring
Housing
Bulkhead
Diagram C
Bulkhead
Cap