Housing Camera And Setup; Step 1 - Remove/Attach Tray And Handle - Ikelite 6970.07 User Manual

HOUSING AND CAMERA SETUP

STEP 1 - Remove/Attach Tray and Handle

The Tray and Handle may be removed for transport and then
re-attached for housing use. We recommend leaving the Tray and
Handle attached whenever possible to avoid accidentally scratching
table tops or other surfaces with the Tray Mounting Bolts.
To remove, loosen both 3/8-16 Nuts using a 9/16" open/box end or
socket Wrench (not supplied). Do not lose Tray Spacer; it is needed
for re-attachment of Tray and Handle.
3/8-16 Nut
8
MADE IN USA
Wrench - not supplied
Quick Release
Handle and Tray
Tray Mounting Bolt
Tray Spacer