Zoom Control - Ikelite 6146.02 Instruction Manual

Problem
Water enters the
housing
Pictures are too blue
or too green

Zoom Control

After you have used the housing's
zoom control, it must be returned to the
center position to disengage. If the
housing zoom control is pushing the
zoom lever in either direction, you may
not be able to take a picture or access
other functions. This is because the
camera is receiving a signal from the
engaged zoom control.
28
Solution
- Remove, clean and properly lubricate the main
o-ring.
- Look for hair, dirt, or foreign debris crossing the
o-ring seal.
- Reassemble the housing without a camera
installed and immerse in water.
- Return housing to Ikelite for evaluation.
- Use custom (manual) white balance. Reset for
each working depth or when attaching a
color correcting filter to the camera lens.
- Add an external strobe.
- Move in closer to your subject when taking a
picture.
- Add an optional color correcting filter to the
Housing Port.
+
-
Zoom Control
"Disengaged"
(Center Position)
+
-
Zoom Control
"Engaged"