Initial Settings - Yamaha Digital Sound Projector YSP-4300 Owner's Manual

Initial settings
Yamaha's proprietary yAired technology enables the wireless
connection of the center unit and subwoofer. Wireless connection
of the subwoofer allows for subwoofer installation without
concern for cables. When the transmitter (YIT-WI 2TX) is used,
iPods or computers call be connected wirelessly to play music
stored on these devices through this unit.
For details of YIT-WI2TX, refer to "Safety and Accessory
[nformatiou" (separate booklet).
When playing content fi'om a TV or Blu-ray disc player, the
center unit transmits audio signals that are received by the
subwoofer. When YIT-WI2TX is used to play songs stored on an
iPod or computer, YIT-WI2TX sends audio signals that are
received by the center unit and subwoofer.
The same group [D must be assigned to all components. By
default, the ceuter unit, subwoofer, aud YIT-WI2TX are assigned
a group ID of A 1. This group ID does uot ueed to be chauged.
GrouplDs
The center unit, subwoofer, and YIT-Wl2TX can be assigned a
group ID from three possible sets: A I-A3, B I-B3, C 1-C3.
AI-A3, BI-B3: Audio delay is less than that of the C1-C3 set.
C1-C3: Use when playing music stored on a computer via this
unit ff_p. 48).
To prevent wireless connection of another yAired Yamaha sound
system or device installed near this unit or the YIT-WI2TX,
assign a different group ID to this unit and the YIT-WI2TX.
Changing the group ID
Center unit
Change the group ID from "GROUP ID" in the setup meuu
ff_p. 64).
Subwoofer
Use the group [D switches on the back of the subwoofer to
change the group [D ff_p. 20).
YIT-W12TX
Use the group [D switches on the side of YIT-Wl2TX to change
the group ID. For details of YIT-WI2TX, refer to "Safety and
Accessory [nformatiou" (separate booklet).
Visual operation of this unit
is possible by displaying its
menu screen on the TV.
Use the button for switching
between input sources on the
TV's remote control to
select this unit.
When this unit and the TV
are connected as shown
below', select "HDM[ 1".
TV remote control (example)
_ Switch
'snoPuU tce s
TV
IN1 IN2 INS
H_MI
,,,/
this unit
The menu display
The setup meuu is displayed on the TV screeu when the SETUP
key is pressed. When the TV is receiving HDM[ signals, the
menu is superimposed over video content. Press the SETUP key a
second time to cancel setup meuu display.
SETUP MENU
]HDMI
lyAired
]DISPLAY
I_FORMATION
It Note 1
he setup tnenu (_Tp. 58) can only be displayed on a TV screen. It
annol be shown in the lront panel display.
21
En