Showing Audio Information And Function Settings - Yamaha YMS-4080 Owner's Manual

Showing audio information and function
settings
The type of audio signal being played, as well as settings for
functions such as the bass extension function can be confirmed by
the status of indicators.
1
Press INFO on the remote control.
The indicators on the unit will show the following audio
information for three seconds immediately after INFO is
pressed.
a b c d e f
34
Show the type of audio signal.
1
HDMI glows (white): Dolby Digital
HDMI glows (red): DTS
TV glows (white): AAC
HDMI and TV off: PCM/analog input/no input
Show whether Dolby Pro Logic II is enabled or disabled. Dolby Pro
2
Logic II is enabled automatically when 2-channel stereo signals are
played in surround sound.
Glows: Enabled
Off: Disabled
Show the bass extension function setting.
3
Glows: Enabled
Off: Disabled
Show the clear voice function setting.
4
Glows: Enabled
Off: Disabled
Show the network standby function setting.
5
Glows: Enabled
Off: Disabled
Show the Bluetooth function setting.
6
Glows (blue): Enabled
Off: Disabled
En