Hdmi Control; Hdmi Audioout - Yamaha Digital Sound Projector YSP-4300 Owner's Manual

Hide thumbs Also See for Digital Sound Projector YSP-4300:
Table of Contents

Advertisement

Setup menu
DYNAMIC RANGE3)
Adjust this unit's dynamic range.
Selectable
items: Max*, Standard,
Min/Auto
Max: Outputs sound without adjusting the dynamic range of the
input signals. @
Standard: The dynamic range recommended for regular home
use.
Min/Auto:
Min: Sets dynamic range at a level that supports comfortable
listening at low volumes.
Auto: Sets dynamic range in accordance with information
received from input signal.
D01by Pkllx PARAMETER
Adjust Dolby Pro Logic IIx Music surround decoder parameters.
Sub menu: Center Width
The greater the value, the broader the sound to the left and right.
Smaller values restrict sound to the center.
Adjustable range: 0 to 7 (default:
3)
Sub menu: Panorama
When this is set to "ON", sounds from the front left and right
channels are routed to the left and right for a surround, panoramic
effect.
Seleetable
item: OFF*, ON
Sub menu: Dimension
This setting adjusts the difference in levels between the front and
surround channels. The greater the value, the higher the volume
from the front channel. The smaller the value, the higher the
volume from the surround channels.
Adjustable range: -3 to +3 (default:
O)
Use to configure the settings related to HDM[ signals and the
HDM[ control function.
HDMI CONTROL
Turn HDM[ control (_,:p. 30) on or off.
Selectable
item: OFF*, ON
"OFF": Disable the control function. The standby power
consumption of this unit decreases.
"ON": Enable the control function.
HDMI AUDIOOUT
Use to select a component to play back HDMI audio signals. This
setting is effective when "HDM[ CONTROL" is set to "OFF". 5
Selectable
item: AMP*, TV
"AMP": Play back the input sound signal.
"TV": Plays audio content from the TV connected to the HDM[
OUT (ARC) jack.
TV INPUT
If your TV is not ARC compatible
(or if the ARC feature
has
been disabled),
TV audio
is input via the INPUT
DIGITAL
TV
(OPTICAL)
jack (default).
This unit's input source
can be
changed
to the AUX
INPUT
DIGITAL
(COAXIAL)
jack. G}
Selectable
item:
OPTICAL*,
COAXIAL
),p_,
]ii il;i;iiiii_;il
ilii _i_i_ii
_
;?;;_i{ii
/ .................
_ ¸:¸¸;¸7
Dynamic
range
describes
the dilference
belween
minimum
and
nMtxi
['fILl n]
volunle.
_ng
"Adaptive
DRC"
is automalically
sel to "OFF"
when
the sellings
other
lhan
"Max"
is selected.
HDMI videosignalsinput to oneof the HDMI IN jacks of this unit are
always
outputfi'omlheHDMI OUT
(ARC)jack
of tiffs unit.
_nz
II this unit's
input
source
is switched
to "COAXIAL",
audio
is input
lrom
lhe device
{TV)
connecled
lo lhe AUX
INPUT
DIGITAL
jack
on
this unil when the TV key is pressed. Audio is input fi'omthe device
colmected to the INPUT DIGITALTV jack on this unil when the AUX
key is pressed.
63
En

Advertisement

Table of Contents
loading

This manual is also suitable for:

Digital sound projector ysp-3300

Table of Contents