What Is The Hdmi Control Function - Yamaha Digital Sound Projector YSP-4300 Owner's Manual

Initial settings
HDMI1
What is the HDMI control function?
This trait call be operated using a TV's reruote control if the TV
supports the HDM[ control ftmction and is connected to this unit
via HDM[ cable (e.g. REGZA Link; some TVs excluded).
The following 6 ftmctions are supported)}
1.
Remote control of TV (Example)
Turn on/off
Both the TV and this/mit turn on/off at
tile same time.
2. Switch input sources
• The input source lklr this unit switches
accordingly when the TV's input
source is switched. The input source
lkw this unit also switches when a
Blu-ray disc player is selected as the
input source from the TV's menu
display.
• The input source can be switched
while this unit is in standby mode.
3. Control volume
This unit's volume can bc ad.justcd when
"HDMI AUDIO OUT" 0" P. 63) is set to
"AMP" (default).
4. Switch the audio output
device (TV or this unit)
5. HDMI signal pass-through
6.
HDMI input signals are output from the HDMI OUT (ARC)jack. Video and
audio content from an HDMI input source art.' output from tile TV when this
unit is in standby mode.
ARC function
Audio signals output from the HDMI (AR()jack on tilt' TV can bc input to
this unit.
First, try the operations described above with your TV's remote
control. If you are able to perform these operations, you may
continue operating this unit with your TV's remote control. If you
are not able to perform these operations, configure HDM[ control
settings (_: p. 31 ).
With some TVs, the following additional functions can be
controlled.
• Turning the UuiVolume function on and off
• Navigating this unit's setup menu displayed on the TV
• Operating the browse/playback screens for an iPod or USB
device connected to the USB jack (YSP-4300 only)
• Even if your TV supports the HDMI control Rmction, some functions
may not be available. For details, refer to the manual supplied with
your TV.
• If you connect this unit to a device such as a Blu-ray disc player that
supports HDMI control via HDMI cable, you can control that device
using the HDMI control flmction. For details, relier to the manual
supplied with each device.
• We suggest using devices (TV, Bh>ray disc player, etc.) fi'om the
same manufacturer.
30
En