Installingthe Intellibeam Microphone - Yamaha Digital Sound Projector YSP-4300 Owner's Manual

Initial settings
Due to differences in room sizes and shapes, positioning of this
unit, and the lifestyle of users, settings for each channel must be
adjusted in order for this unit to provide the optimal listening
experience.
This unit is equipped with IntelliBearn, which automatically
adjusts settings for each channel. IntelliBearn offers two features,
"beam optimization" and "sound optimization".
Beam optimization:
This feature optimizes the beam angle so that the parameter best
matches your listening environment.
Sound optimization:
This feature optimizes the beam delay, volume, and quality so
that the parameters best match your listening environment.
This unit performs these two automatic optimizations with the aid
of the supplied [ntelliBeam microphone.2)
• The AUTO SETUP procedure nmy not be run successffflly if this
unit is installed in one of the rooms described in "Conditions that
make it difficult lor sotmd beams to achieve surround sound" on
page 11. The My SurromM fimction can be used to enjoy rich
surround sound in these types of rooms as well. See "Changing
the audio output method tk_rsurround playback" 0_p. 36, 37) lor
more information.
• Do not connect the lntelliBeam microphone to an extension
cable as doing so may result in an inaccurate sound optimization.
• After you have completed the AUTO SETUP procedure, be sure
to disconnect the lntelliBeam microphone.
• The IntelliBeam microphone is sensitive to beat.
Keep the lntelliBeam microphone away from direct sunlight.
Do not place the lntelliBeam microphone on top of this unit.
J
Installingthe IntelliBeam microphone
Place the IntelliBeam microphone at your
normal listening position.
• Use the supplied cardboard microphone stand or a tripod to
place the [ntelliBeam microphone at the same height as your
ears would be when you are seated.
• Position the [ntelliBeam microphone so that it is parallel with
the floor.
Assembling the supplied cardboard
microphone stand
Place
4 horizontally 5
Run through
Make sure that there are no obstacles between the [ntelliBeam
microphone and the walls in your listening room as these objects
obstruct the path of sound beams.
However, any objects that are in contact with the walls will be
regarded as a protruding part of the walls.
llltelliBeam nficrophone Upper limit
:h_of
Within 1 m i3 3 iii!i
:Jj : t i' wi
rd =
st lnd_
1.8 m (6.0 fl) __ Lower limil
f
f
f
)
f i;_{:_ ¸¸
i
CaMboard microphone stand
• "BEAM+SOUND OPTIMIZE" screen appears automatically when
the lntelliBeam microphone is connected. "BEAM OPTIMIZE
ONLY" or "SOUND OPTIMIZE ONLY" can be selected separately
in the setup menu(_ p. 26).
• Up to three sels of aulornatically configured sellings can be stored in
lhis unil's memory (_p. 28). You can save the several dala depending
on lislening room and you can change lhe setting conveniently.
Z
23
En