Yamaha YSP-4100 Service Manual
Hide thumbs Also See for YSP-4100:

Advertisement

YSP-4100/YSP-5100
This service manual is for the YSP-4100/5100.
For service manual of the SWK-W10 and YIT-W10 (PDX-50TX), please refer to the following publication number:
This manual has been provided for the use of authorized YAMAHA Retailers and their service personnel.
It has been assumed that basic service procedures inherent to the industry, and more specifi cally YAMAHA Products, are already known
and understood by the users, and have therefore not been restated.
WARNING:
IMPORTANT:
The data provided is believed to be accurate and applicable to the unit(s) indicated on the cover. The research, engineering, and service
departments of YAMAHA are continually striving to improve YAMAHA products. Modifications are, therefore, inevitable and
specifi cations are subject to change without notice or obligation to retrofi t. Should any discrepancy appear to exist, please contact the
distributor's Service Division.
WARNING:
IMPORTANT:
■ CONTENTS
TO SERVICE PERSONNEL ............................................2
FRONT PANELS .............................................................3
REAR PANELS ...........................................................4-7
BOTTOM PANELS ..........................................................8
REMOTE CONTROL PANELS .......................................9
SPECIFICATIONS / 参考仕様 ................................. 10-15
INTERNAL VIEW .......................................................... 16
UPDATING FIRMWARE /
ファームウェアのアップデート ............................22-38
ダイアグ(自己診断機能) .....................................39-59
DIGITAL SOUND PROJECTOR
SWK-W10:
1011 6 0
Failure to follow appropriate service and safety procedures when servicing this product may result in personal injury,
destruction of expensive components, and failure of the product to perform as specifi ed. For these reasons, we advise
all YAMAHA product owners that any service required should be performed by an authorized YAMAHA Retailer or
the appointed service representative.
The presentation or sale of this manual to any individual or fi rm does not constitute authorization, certifi cation or
recognition of any applicable technical capabilities, or establish a principle-agent relationship of any form.
Static discharges can destroy expensive components. Discharge any static electricity your body may have
accumulated by grounding yourself to the ground buss in the unit (heavy gauge black wires connect to this buss).
Turn the unit OFF during disassembly and part replacement. Recheck all work before you apply power to the unit.
SERVICE MANUAL
, YIT-W10:
1011 6 3
IMPORTANT NOTICE
DISPLAY DATA .............................................................60
IC DATA ...................................................................61-66
PIN CONNECTION DIAGRAMS .............................67-69
BLOCK DIAGRAM ..................................................70-71
PRINTED CIRCUIT BOARDS .................................72-88
SCHEMATIC DIAGRAMS ..................................... 89-101
REPLACEMENT PARTS LIST ............................ 103-129
REMOTE CONTROL ........................................... 130-132
ADVANCED SETUP / 拡張メニュー .................. 133-135

Advertisement

Table of Contents
loading

Summary of Contents for Yamaha YSP-4100

  • Page 1: Table Of Contents

    This manual has been provided for the use of authorized YAMAHA Retailers and their service personnel. It has been assumed that basic service procedures inherent to the industry, and more specifi cally YAMAHA Products, are already known and understood by the users, and have therefore not been restated.
  • Page 2: To Service Personnel

    YSP-4100/YSP-5100 ■ TO SERVICE PERSONNEL AC LEAKAGE WALL EQUIPMENT TESTER OR 1. Critical Components Information OUTLET UNDER TEST EQUIVALENT Components having special characteristics are marked must be replaced with parts having specifications equal to those originally installed. 2. Leakage Current Measurement (For 120V Models Only)
  • Page 3: Front Panels

    YSP-4100/YSP-5100 ■ FRONT PANELS YSP-4100 U, C, T, A, B, G, L, V, J models YSP-5100 U, C, T, K, A, B, G, L, V, J models...
  • Page 4: Rear Panels

    YSP-4100/YSP-5100 ■ REAR PANELS YSP-4100 U, C models T, A, B, G, L, V models J model Label U, C, T, A, B, G, L, V models J model U, C, T, A, B, G, L, V models U, C, A, B, G, L, V models...
  • Page 5 YSP-4100/YSP-5100 Labels U, C models B, G models V model T model L model J model A model...
  • Page 6 YSP-4100/YSP-5100 YSP-5100 U, C models T, K, A, B, G, L, V models J model Label U, C, T, K, A, B, G, L, V models J model U, C, T, K, A, B, G, L, V models U, C, K, A, B, G, L, V models...
  • Page 7 YSP-4100/YSP-5100 Labels U, C models A model V model T model B, G models J model K model L model...
  • Page 8: Bottom Panels

    YSP-4100/YSP-5100 ■ BOTTOM PANELS YSP-4100 U, C, T, A, B, G, L, V models J model YSP-5100 U, C, T, K, A, B, G, L, V models J model...
  • Page 9: Remote Control Panels

    YSP-4100/YSP-5100 ■ REMOTE CONTROL PANELS FSR101 FSR102 FSR100 (U, C models) (T, K, A, B, G, L, V models) (J model)
  • Page 10: Specifications / 参考仕様

    YSP-4100/YSP-5100 ■ SPECIFICATIONS / 参考仕様 ■ Amplifier Section / アンプ部 ■ Input/Output / 入力/出力 Maximum Power / 実用最大出力 (JEITA) (4 ohms, 10% THD) Audio Input Jack / 入力端子 (7 series: TV, AUX1, AUX2, HDMI IN1 – 4) Woofer (100 Hz) ..............20 W/ch Analog ................
  • Page 11 YSP-4100/YSP-5100 Language for Menu Display / メニュー表示言語 Power Consumption / 消費電力 U, C, T, K, A, B, G, F, L, V, J models ....................55 W ....English, French, German, Spanish, Italy, Dutch, Russian Standby Power Consumption / 待機時消費電力 J model HDMI control: OFF / Wireless power: OFF ................Japanese, English...
  • Page 12 YSP-4100/YSP-5100 The “ ” logo and “IntelliBeam” are trademarks of Yamaha “HDMI” , the “HDMI” logo and “High-Definition Multimedia Interface” are Corporation. trademarks or registered trademarks of HDMI Licensing LLC. 「インテリビーム」 「IntelliBeam」は、ヤマハ株式会社の商標です。 HDMI、HDMI ロゴおよび High-Defi nition Multimedia Interface は、HDMI Licensing LLC の商標または、登録商標です。...
  • Page 13 YSP-4100/YSP-5100 • DIMENSIONS / 寸法図 YSP-4100 4 screw holes A screw with a diameter of 6 mm can be used. [Hole depth: 16 mm (5/8")] Rear view 215 (8-1/2") 265 (10-3/8") 250 (9-7/8") 300 (11-3/4") 57 (2-1/4") 69 (2-3/4") (4-7/8") 114 (4-1/2")
  • Page 14 YSP-4100/YSP-5100 • SET MENU TABLE CATEGORY MENU SUB-MENU VALUE [INITIAL] A) MEMORY 1) MEMORY LOAD a) MEMORY1 (メモリー 1) (メモリー) (メモリー呼び出し) b) MEMORY2 (メモリー 2) c) MEMORY3 (メモリー 3) 2) MEMORY SAVE a) MEMORY1 (メモリー 1) b) MEMORY2 (メモリー 2)...
  • Page 15 (入力端子名変更) A to Z, 0 to 9, a to z, symbols (! ? < > etc.) 3) HDMI SETUP a) SUPPORT AUDIO [Model name (YSP-4100 or YSP-5100)] / OTHER (HDMI 設定) (サポート音声) ( [モデル名(YSP-4100、YSP-5100) ] / その以外) * “HDMI CONTROL” is set to “OFF”...
  • Page 16: Internal View

    YSP-4100/YSP-5100 ■ INTERNAL VIEW YSP-4100 Front view Rear view DRIVER WOOFER POWER (5) P.C.B. FL (5) P.C.B. DRIVER ARRAY FL (1) P.C.B. FL (6) P.C.B. DAMP (2) P.C.B. HDMI P.C.B. FL (3) P.C.B. DAMP (1) P.C.B. DSP P.C.B. FL (2) P.C.B.
  • Page 17: Disassembly Procedures / 分解手順

    Spread a rubber sheet and cloth and place this unit a. ゴムシートと布を敷き、本機を底面が上になるように on the cloth with its bottom side up. (Fig. 1) 置きます。 (Fig. 1) b. Remove 8 screws (YSP-4100) / 12 screws (YSP-5100) b. ① のネジ 8 本(YSP-4100)/12 本(YSP-5100)を外 ( ① ). (Fig. 1) します。 (Fig. 1)...
  • Page 18 YSP-4100/YSP-5100 5. Removal of HDMI P.C.B. 5. HDMI P.C.B. の外し方 a. Remove 4 screws ( ⑪ ). (Fig. 2) a. ⑪ のネジ 4 本を外します。 (Fig. 2) b. Remove CB7-8, CB301-302 and CB413. (Fig. 2) b. CB7-8、CB301 ∼ 302、CB413 を外します。 (Fig. 2)...
  • Page 19 YSP-4100/YSP-5100 9. Removal of Amp Unit 9. アンプユニットの外し方 a. Remove 9 screws ( ), 12 screws ( ), 4 screws ( ) のネジ 9 本、 のネジ 12 本、 のネジ 4 本、 and 3 screws ( ). (Fig. 3) のネジ 3 本を外します。 (Fig. 3)...
  • Page 20 YSP-4100/YSP-5100 11. Removal of Drivers 11. スピーカーユニットの外し方 a. Remove 2 screws/piece ( ). (Fig. 4) のネジ 2 本/個を外します。 (Fig. 4) b. Remove the drivers. (Fig. 4) b. スピーカーユニットを取り外します。 (Fig. 4) Make sure that all the removed driver parts are ※ 取り外したスピーカユニットは、すべて決められ...
  • Page 21 YSP-4100/YSP-5100 When checking the P.C.B.s: P.C.B. をチェックする場合には: • Spread the rubber sheet and the cloth. Then place ・ ゴ ム シ ー ト と 布 を 敷 き、 そ の 上 に P.C.B. を 置 い て the P.C.B.s on the cloth and check it. (Fig. 5) チェックします。...
  • Page 22: ファームウェアのアップデート

    YSP-4100/YSP-5100 ■ UPDATING FIRMWARE / ファームウェアのアップデート When the following parts are replaced, the firmware must 下記の部品を交換した場合、それに対応する方法でファー be updated to the latest version by using the correspond- ムウェアを最新バージョンにアップデートする必要があ ing update method. ります。 Replaced parts / 交換した部品 Update method / アップデートの方法 Main microprocessor...
  • Page 23 YSP-4100/YSP-5100 ● Required tools ● 必要なツール • Firmware downloader program ・ ファームウェア書き込み用プログラム ............FlashSta.exe ................FlashSta.exe (For Main microprocessor firmware (メインマイコンファームウェア Wireless module firmware ワイヤレスモジュールファームウェア AirWired microprocessor firmware) AirWired マイコンファームウェア用) ......DSP_FLASHER_YSP2009.exe ..........DSP_FLASHER_YSP2009.exe (For DSP1 Flash ROM firmware) (DSP1 フラッシュ ROM ファームウェア用 ) •...
  • Page 24 YSP-4100/YSP-5100 Updating the main microprocessor firmware メインマイコンファームウェアのアップデート ● Connection ● 接続 Disconnect the power cable of this unit from the ※ 本機の電源コードを AC コンセントから抜いてく AC outlet. ださい。 • Connect the RS-232C terminal located on the rear ・ 本 機 の RS-232C 端 子 と PC の シ リ ア ル ポ ー ト...
  • Page 25 YSP-4100/YSP-5100 2. Start up FlashSta.exe. 2. FlashSta.exe を起動します。 The screen appears as shown below. (Fig. 2) 下記の画面が表示されます。 (Fig. 2) 3. Select the data to be transmitted and port. (Fig. 2) 3. 送信データ、ポートを選択します。 (Fig. 2) • Select Program ・ Select Program Select Internal flash memory.
  • Page 26 YSP-4100/YSP-5100 5. Click [Setting], and set the baud rate. (Fig. 4) 5. [Setting]をクリックし、通信速度の設定を行い ます。 (Fig. 4) 115200 Fig. 4 6. Click [E.P.R.], then the “Erase” screen appears. 6. [E.P.R]をクリックすると、 「Erase」が表示されま (Fig. 5) す。 (Fig. 5) 7. Click [OK] to start writing. (Fig. 5) 7.
  • Page 27 YSP-4100/YSP-5100 8. When writing of the firmware is completed, the 8. ファームウェアの書き込みが完了すると、以下の screen appears as shown below. (Fig. 6) 画面が表示されます。 (Fig. 6) Click [OK]. (Fig. 6) [OK]をクリックします。 (Fig. 6) 9. Click [Exit] to end FlashSta.exe. (Fig. 6) 9. [Exit]をクリックして FlashSta.exe を終了します。...
  • Page 28 YSP-4100/YSP-5100 Updating the DSP1 FLASH ROM firmware DSP1 フラッシュ ROM ファームウェアのアップデート ● Connection ● 接続 • Connect the RS-232C terminal located on the rear ・ 本 機 の RS-232C 端 子 と PC の シ リ ア ル ポ ー ト...
  • Page 29 YSP-4100/YSP-5100 3. Click [...] and select the firmware name. (Fig. 2) 3. [...]をクリックし、 ファームウェアを選択します。 DSP1 FLASH ROM firmware: (Fig. 2) YSP09HIa_data1_verx_xxr.hex DSP1 フラッシュ ROM ファームウェア: YSP09HIa_data1_verx_xxr.hex Click [Open] [開く]をクリック Fig. 2 4. Click [RDY] to set to the standby mode. (Fig. 3)
  • Page 30 YSP-4100/YSP-5100 5. Connect the power cable of this unit to the AC 5. 本機の電源コードを AC コンセントに接続します。 outlet. 6. ダイアグを起動し、サブメニュー 16-3. UPDATE 6. Start up the self-diagnostic function and select TI を選択します。 ( 「ダイアグ」参照) “16-3. UPDATE TI” sub-menu. 7. リモコンの ENTER キーを押して書き込みを開...
  • Page 31 YSP-4100/YSP-5100 Updating the Wireless Module Firmware and ワイヤレスモジュールファームウエアと the AirWired microprocessor Firmware AirWired マイコンファームウエアのアップデート ● Connection ● 接続 Disconnect the power cable of this unit from the ※ 本機の電源コードを AC コンセントから抜いてく AC outlet. ださい。 • Connect the writing port (CB407 of FL P.C.B.) of ・...
  • Page 32 YSP-4100/YSP-5100 1. Connect the flexible flat cable to the writing port 1. 本機の書き込み用ポートにカード電線を接続しま of this unit. (See “Connection”) す。 ( 「接続」参照) 2. Connect the power cable of this unit to the AC 2. 本機の電源コードを AC コンセントに接続します。 outlet. 3. ダイアグを起動し、サブメニュー 16-3. UPDATE 3.
  • Page 33 YSP-4100/YSP-5100 6. Click [Refer...] and select the firmware name. 6. [Refer...]をクリックし、ファームウェアを選択し (Fig. 4) ます。 (Fig. 4) uaw_firmup_xxxx.mot uaw_fi rmup_xxxx.mot uaw_card_xxxx.mot uaw_card_xxxx.mot The ID code and MCU type are loaded auto- ※ ID、および MCU Type は書き込みファイル選 matically when the file is selected. (Fig. 4) 択後、自動的に取り込まれます。...
  • Page 34 YSP-4100/YSP-5100 8. Click [E.P.R.], then the “Erase” screen appears. 8. [E.P.R]をクリックすると、 「Erase」が表示されま (Fig. 6) す。 (Fig. 6) 9. Click [OK] to start writing. (Fig. 6) 9. [OK]をクリックして書き込みを開始します。 (Fig. 6) Writing being executed. 書き込み中 Fig. 6 10. When writing of the firmware is completed, the 10.
  • Page 35 YSP-4100/YSP-5100 14. Start up the self-diagnostic function and select 14. ダイアグを起動し、サブメニュー 16-3 UPDATE “16-3 UPDATE AW” sub-menu and press the AW を選択してリモコンの ENTER キーを押し “ENTER” key on the remote control. ます。 ( 「ダイアグ」参照) (See “SELF-DIAGNOSTIC FUNCTION”) 書き込みの結果が、以下のように表示されます。 The result of writing is displayed as shown below.
  • Page 36 YSP-4100/YSP-5100 ● Connection ● 接続 Connect this unit and DVD/CD player as shown 本機と DVD/CD プレーヤーを下記のように接続しま below. (Fig. 1) す。 (Fig. 1) Example of connection between digital OPTICAL jacks / OPTICAL 端子使用例 This unit / 本機 DVD/CD player / DVD/CDプレーヤー...
  • Page 37 YSP-4100/YSP-5100 ● Operation Procedures ● 操作手順 1. While pressing the “VOLUME +” key of this unit, 1. 本機の VOLUME + キーを押しながら、本機の connect the power cable of this unit to the AC out- 電源コードを AC コンセントに接続します。 let. (Fig. 2) (Fig. 2)...
  • Page 38 YSP-4100/YSP-5100 When the version of the firmware to be written ※ 本機に既存のファームウェアと、書き込もう is the same as the one existing in this unit, としているファームウェアのバージョンが同 “Same Version”, “Please...” and “Power off!!” じ場合、 Same Version 、 Please... 、 Power are displayed repeatedly. (Updating is not off!! の表示が繰り返されます。...
  • Page 39: Self-Diagnostic Function / ダイアグ(自己診断機能

    YSP-4100/YSP-5100 ■ SELF-DIAGNOSTIC FUNCTION / ダイアグ(自己診断機能) There are 20 main menu items, each of which has sub- メ イ ン メ ニ ュ ー は 20 個 あ り、 そ の そ れ ぞ れ に サ ブ メ menu items.
  • Page 40 YSP-4100/YSP-5100 MAIN MENU SUB MENU 13 HDMI SELECT 1 1HDMI NONE 2 1HDMI IN 1 3 1HDMI IN 2 4 1HDMI IN 3 5 1HDMI IN 4 6 UPCV THROUGH 7 UPCV COMP 8 UPCV CVBS 14 SIRIUS (U model)
  • Page 41 YSP-4100/YSP-5100 ● Starting Self-Diagnostic Function ● ダイアグの起動 While pressing the “VOLUME +” and “VOLUME -” keys of 本機の下図に示す VOLUME + と VOLUME - キーを押 this unit as shown in the figure below, press the “ ” (Power) しながらリモコンの (電源)キーを押して電源をいれ key on the remote control to turn on the power.
  • Page 42 YSP-4100/YSP-5100 CAUTION! 注意! Using this product with the protection function disabled プロテクションを解除した状態でのダイアグモードは、 may cause further damage to itself. Use special care 危険な状態でもプロテクションが作動しないため、動作 when using this mode. させると、機器を破壊することがあります。このモード を使用する場合は十分注意してください。 ● Canceling Self-diagnostic function ● ダイアグの解除 Before canceling self-diagnostic function, execute ダイアグを解除する前に、メインメニュー No. 7 の...
  • Page 43 YSP-4100/YSP-5100 For details of protection functions, refer to the main menu プロテクションの詳細は、メインメニュー No. 8 AD DATA No. 8 AD DATA CHECK. CHECK を参照してください。 ● History of protection function ● プロテクションの履歴 When the protection function has worked, its history is プロテクションが働いた場合、履歴をバックアップして...
  • Page 44 YSP-4100/YSP-5100 ● Functions in Self-Diagnostic Function ● ダイアグ中の機能 mode In addition to the self-diagnostic function menu items, ダイアグメニューの他に、以下の機能が動作します。 functions listed below are available. ・ 電源 オン / オフ • Power on/off ・ マスターボリューム • Master volume ・ ミュート • Muting ・...
  • Page 45 YSP-4100/YSP-5100 ● Details of Self-diagnostic function menu ● ダイアグメニュー詳細 1. RAM THROUGH 1. RAM THROUGH Input signal, which is unconverted to beam, is output 入 力 さ れ た 信 号 は、 ビ ー ム 化 は 行 わ れ ず、 サ ブ メ...
  • Page 46 YSP-4100/YSP-5100 2. HDMI AUDIO 2. HDMI AUDIO Using the sub-menu, the audio signals input to HDMI サブメニューにより、HDMI IN に入力された音声信号 IN are selected and output. が選択、出力されます。 2-1. HDMI AUDIO H D M I A U D I O [ S P ] Using the “ENTER”...
  • Page 47 YSP-4100/YSP-5100 4. FL / OSD / LED CHECK 4. FL / OSD / LED CHECK This menu is used to check the FL display, video FL 表示部、 映像表示部およびインジケーターのチェッ control and indicator sections. When checking the クプログラムです。映像制御部をチェックする場合 video control section, connect a TV monitor to this には、TV モニターと本機をコンポーネントケーブル、...
  • Page 48 YSP-4100/YSP-5100 5. MANUAL TEST 5. MANUAL TEST The built-in noise generator of DSP outputs the test DSP 内蔵のノイズ発生回路によって、サブメニュー noise through the channels specified by using the で指定したチャンネルへテストノイズが出力されま sub-menu. す。 The noise frequency for subwoofer is 30 to 80 Hz. サブウーファー用のノイズ周波数は 30 ∼ 80 Hz、そ...
  • Page 49 YSP-4100/YSP-5100 FACTORY PRESET 7. FACTORY PRESET This menu is used to reserve/inhibit initialization of the バックアップ IC の初期化を予約 / 禁止します。 back-up IC. PRESET INHI (Initialization inhibited) / PRESET INHI(初期化禁止) 7 ) P R E S E T I N H I Initialization of the back-up IC is not executed.
  • Page 50 YSP-4100/YSP-5100 8. AD DATA CHECK 8. AD DATA CHECK This menu is used to display the A/D conversion 本機パネルキー、プロテクションなどを検出してい value of the microprocessor which detects panel keys るメインマイコンの A/D 変換の値を、サブメニュー of this unit and protection functions by using the sub- で表示します。...
  • Page 51 YSP-4100/YSP-5100 10. PROTECTION HISTORY 10. PROTECTION HISTORY This menu is used to display the history of protection プロテクション履歴が表示されます。 function. Example 10-1. History 1 / 履歴1 1 0 - 1 ) P S x x x x Example 10-2. History 2 / 履歴2...
  • Page 52 330C: YSP-5100 12-4. HDMI vendor name V N : Y A M A H A The vendor name “YAMAHA” of this unit written in HDMI module is displayed. HDMI モジュールに書き込まれている本機のベンダー名 YAMAHA が表示されます。 12-5. Video information V I D E O I N 1 0 8 0 p The information of input video signal is displayed.
  • Page 53 YSP-4100/YSP-5100 13. HDMI SELECT 13. HDMI SELECT This menu is used to display information of the HDMI HDMI 入力信号に関する情報を表示します。 input signal. 13-1. HDMI none 1 3 ) H D M I N O N E No signal is output. 何も出力されません。...
  • Page 54 YSP-4100/YSP-5100 14. SIRIUS TEST (U model) This menu is used to display information about the SIRIUS. 14-1. SIRIUS S I R I U S : - - Connection of the SIRIUS antenna module is checked. OK : Normal NG : Abnormal - - : No connected 14-2.
  • Page 55 YSP-4100/YSP-5100 15. WIRELESS 15. WIRELESS This menu is used to display information about the AirWired に関する情報が表示されます。 AirWired. 15-1. AirWired GROUP ID A W G R O U P : [ A 1 ] Select the group ID using the “ENTER” and “RETURN” keys on the remote control.
  • Page 56 れます。 17-1 MODEL M O D E L : Y S P - 4 1 0 0 The model name (YSP-4100 / YSP-5100) is displayed. モデル名(YSP-4100 / YSP-5100)が表示されます。 17-2. DESTINATION D E S T : U , C The destination (U, C, R, T, K, A, B, G, L, V, J) is displayed.
  • Page 57 YSP-4100/YSP-5100 18-6. CEC VERSION C E C V e r . 0 1 . 0 5 The firmware version of CEC (IC6 of DSP P.C.B.) is displayed. CEC(DSP P.C.B. の IC6)のファームウェアバージョンが表示されます。 18-7. SIRIUS VERSION (U model) S R V E R . A 0 0 1 The firmware version of SIRIUS is displayed.
  • Page 58 YSP-4100/YSP-5100 20. DSP CHECK 20. DSP CHECK This menu is used to check operation of speaker スピーカー出力と DSP1/DSP2 の動作をチェックしま output and DSP1/DSP2. す。 20-1. Tx Test Ch 20-1. Tx Test Ch The test noise is automatically output from 決められた順に自動的に各スピーカーユニット each driver in the specified order. Check からテストノイズが出力されます。そのテスト...
  • Page 59 YSP-4100/YSP-5100 20-4. T2 CHECK 20-4. T2 CHECK This menu is used to check operation of T2 T2(DSP2、IC201 DSP P.C.B.)の動作を自動で (DSP2, IC201 DSP P.C.B.) automatically. チェックします。 Press the “ENTER” key on the remote control to リモコンの 決定 キーを押してチェックをス start checking. タートします。...
  • Page 60: Display Data

    YSP-4100/YSP-5100 ■ DISPLAY DATA ● V601 : HNA-17SM07T (FL P.C.B.) ● PIN CONNECTION Pin No. 65-57 Connection Pin No. Connection Pin No. Connection Note: 1) F1, F2 ..Filament pin 2) 1G – 17G ..Grid pin 3) P1 – P35 ..Anode pin 4) NP ..
  • Page 61: Ic Data

    YSP-4100/YSP-5100 ■ IC DATA IC428: M3087BFLBGP CPU (DSP P.C.B.) Microprocessor Port P0 Port P1 Port P2 Port P3 Port P4 Port P5 Port P6 < > < > Peripheral Functions Clock Generation Circuit A/D Converter: 1 circuit Timer (16-bit) Standard: 10 inputs...
  • Page 62 YSP-4100/YSP-5100 Port Function Control Interrupt Timer UART Analog Detail of Function Name Name TxD4/ SDA4/ ANEX1 AW_MOSI S-OUT Air-Wired (1, 2) SPI data OUT (iPod asynchronous data output) SRxD4 CLK4 ANEX0 AW_SCK S-CLK Air-Wired (1, 2) SPI clock OUT CTS4/...
  • Page 63 OSD_N_ 61 P130 of PureDirect) [H: ON L: OFF] DSP2_N_ 62 P53 DA70Y (latter stage) reset WFDAC_ N_MUTE/ Woofer MUTE control (YSP-4100) (Old DAC-1 Mute) 63 P52 DIT1_N_ [L: MUTE] D5_N_ D-5 Mute (YSP-4100) 64 P51 MUTE/3DIR_ [L: MUTE] N_CS...
  • Page 64 YSP-4100/YSP-5100 Port Function Control Interrupt Timer UART Analog Detail of Function Name Name VDEC_N_ 67 P126 Video Enc/Dec. OSD reset OSD_N_ 68 P125 OSD chip select DSP_ DSP power supply ON/OFF control 69 P47 [H: ON, L: OFF] CEC_ CEC microprocessor reset request from HDMI CEC microprocessor...
  • Page 65 YSP-4100/YSP-5100 Port Function Control Interrupt Timer UART Analog Detail of Function Name Name AW_N_ Air-Wired (head phone /SWFR) mute 110 P07 AN07 MUTE [L: MUTE] 111 P06 AN06 SYS_ON Subwoofer system connection ON/OFF STBY_ STANDBY LED OUT 112 P05 AN05...
  • Page 66 YSP-4100/YSP-5100 Key detection for A/D port Key input (A/D) pull-up resistance 10 k-ohms + 1.2k 0 – 0.1 0.2 – 0.5 A/D value (3.3V=255) 0 – 7 8 – 40 KEY1 (133 pin) VOLUME + VOLUME – KEY1 (134 pin) INPUT –...
  • Page 67: Pin Connection Diagrams

    YSP-4100/YSP-5100 ■ PIN CONNECTION DIAGRAMS • ICs AD8056AR ADV7800BSTZ-80 BD3843FS-E2 BH76330FVM-TR AK4388AET AK4420ET BR25L320F-W EEPROM D70YE101BRFP266 FA5511N-D1-TE1 K4S641632N-LC60000 M3087BFLBGP SiI9233ACTU KIA78M05F L6732TR LC72725KM-UY-TLM-E LC89058WD-E M12L16161A-7TG 1: INPUT 2: COMMON 3: OUTPUT M66003-0131FP-R MAX3232CPWR MB90050PF-G-118-E1 MIP2F40MSSCF MN103SFD7GYAD MB90050PF-G-119-E1 MX29LV160DBTI-70G NJM2068MD-TE2 NJM2388F33...
  • Page 68 YSP-4100/YSP-5100 NJM431U NJM78M05FA NJM78M12FA NJM2717M PCM1803DBR PQ1CG41H2FZ 1: REFERENCE 2: ANODE 3: OUT 3: IN 3: CATHODE 1: IN 1: OUT 2: GND 2: COM PQ1CZ41H2Z R1154H050B-T1-F R1154N033B-TR-F R1172S181B-E2-F SN74LVC245APWR R1172H181B-T1-F R1172S331B-E2-F R1172H331D-T1-F 1: CE 2: GND 3: NC 4: VDD...
  • Page 72: Printed Circuit Boards

    IC410 CB403 IC407 IC402 CB404 IC11 IC408 IC427 IC206 IC424 IC203 IC421 CB405 IC431 IC401 IC201 IC430 IC202 IC210 CB412 CB407 CB406 IC419...
  • Page 74 W602...
  • Page 76 W501 IC301 IC302 IC303 IC304 CB302...
  • Page 78 IC201 IC101 IC253...
  • Page 80 CB302 IC553 IC551 W304 IC501 IC401 IC301 IC601 CB301...
  • Page 81 IC603 IC605 IC604...
  • Page 82 CB501 IC502 IC510 IC509 IC511 CB511 W508...
  • Page 83 IC512 IC507...
  • Page 84 CB701...
  • Page 85 IC852...
  • Page 86 IC17 IC18...
  • Page 87 IC305 IC306 IC304...
  • Page 89: Schematic Diagrams

    Sense AMP...
  • Page 92 Port P7 Port P8 Port P9 Port P10 < >...
  • Page 102: Replacement Parts List

    YSP-4100/YSP-5100 ■ REPLACEMENT PARTS LIST • ELECTRICAL COMPONENT PARTS WARNING ● Components having special characteristics are marked and must be replaced with parts having specifications equal to those originally installed. ● 印のある部分は、安全確保部品を示しています。部品の交換が必要な場合、パーツリストに記載されている部品を使用し てください。 ● 部品価格ランクは、予告なく変更することがあります。 ABBREVIATIONS IN THIS LIST ARE AS FOLLOWS: C.A.EL.CHP...
  • Page 103 YSP-4100/YSP-5100 P.C.B. DSP Ref No. Part No. Description Remarks Markets 部 品 名 ランク ✻ New Parts *新規部品...
  • Page 104 YSP-4100/YSP-5100 P.C.B. DSP Ref No. Part No. Description Remarks Markets 部 品 名 ランク ✻ New Parts *新規部品...
  • Page 105 YSP-4100/YSP-5100 P.C.B. DSP Ref No. Part No. Description Remarks Markets 部 品 名 ランク ✻ New Parts *新規部品...
  • Page 106 YSP-4100/YSP-5100 P.C.B. DSP Ref No. Part No. Description Remarks Markets 部 品 名 ランク ✻ New Parts *新規部品...
  • Page 107 YSP-4100/YSP-5100 P.C.B. DSP Ref No. Part No. Description Remarks Markets 部 品 名 ランク ✻ New Parts *新規部品...
  • Page 108 YSP-4100/YSP-5100 P.C.B. DSP and P.C.B. FL Ref No. Part No. Description Remarks Markets 部 品 名 ランク ✻ New Parts *新規部品...
  • Page 109 YSP-4100/YSP-5100 P.C.B. FL Ref No. Part No. Description Remarks Markets 部 品 名 ランク ✻ New Parts *新規部品...
  • Page 110 YSP-4100/YSP-5100 P.C.B. FL and P.C.B. DAMP Ref No. Part No. Description Remarks Markets 部 品 名 ランク ✻ New Parts *新規部品...
  • Page 111 YSP-4100/YSP-5100 P.C.B. DAMP Ref No. Part No. Description Remarks Markets 部 品 名 ランク ✻ New Parts *新規部品...
  • Page 112 YSP-4100/YSP-5100 P.C.B. DAMP Ref No. Part No. Description Remarks Markets 部 品 名 ランク ✻ New Parts *新規部品...
  • Page 113 YSP-4100/YSP-5100 P.C.B. DAMP Ref No. Part No. Description Remarks Markets 部 品 名 ランク ✻ New Parts *新規部品...
  • Page 114 YSP-4100/YSP-5100 P.C.B. DAMP Ref No. Part No. Description Remarks Markets 部 品 名 ランク ✻ New Parts *新規部品...
  • Page 115 YSP-4100/YSP-5100 P.C.B. DAMP and P.C.B. POWER Ref No. Part No. Description Remarks Markets 部 品 名 ランク ✻ New Parts *新規部品...
  • Page 116 YSP-4100/YSP-5100 P.C.B. POWER Ref No. Part No. Description Remarks Markets 部 品 名 ランク ✻ New Parts *新規部品...
  • Page 117 YSP-4100/YSP-5100 P.C.B. POWER Ref No. Part No. Description Remarks Markets 部 品 名 ランク ✻ New Parts *新規部品...
  • Page 118 YSP-4100/YSP-5100 P.C.B. POWER and P.C.B. HDMI Ref No. Part No. Description Remarks Markets 部 品 名 ランク ✻ New Parts *新規部品...
  • Page 119 YSP-4100/YSP-5100 P.C.B. HDMI Ref No. Part No. Description Remarks Markets 部 品 名 ランク ✻ New Parts *新規部品...
  • Page 132: Advanced Setup / 拡張メニュー

    YSP-4100/YSP-5100 ■ ADVANCED SETUP...
  • Page 133 YSP-4100/YSP-5100 ■ 拡張メニューを設定する...
  • Page 134 YSP-4100/YSP-5100...
  • Page 135 YSP-4100/YSP-5100...

Table of Contents