Initial settings
ENTER
SYSTEM
MEMORY
_RETURN
Using AUTO SETUP (IntelliBeam)
f-
• It is normal for loud test tones to be ot/tput dm'ing the AUTO
SETUP procedure.
Make sure that there are no children around
in the listening room while the ALTTOSETUP procedure is in
progress.
• If there are curtains in ynur listening room, we recnmmend
lollowing the procedure below.
1 Open the curtains to improve snund reflectinn.
2 Run "BEAM OPTIMIZE ONLY" (_,p. 26).
3 Close the cm'tains.
4 Run "SOUND OPTIMIZE
ONLY" (_p.
26).
• Make sure that your listening room is as quiet as possible. For
accurate measurement,
turn oft" air conditioner
or other devices
that make noises.
Turn the unit and your TV on.
Switch TV input to display video input
from this unit (_p. 21).
Connect the IntelliBeam microphone to the
INTELLIBEAM
MIC jack on the rear of the
unit.
II
® 2¢01
'c "'
•
_,'
_'_][NNA
I
IMI
UNPU
ANALOG
24
En