Yamaha YSP-40D Owner's Manual
  1. Manuals
  2. Brands
  3. Yamaha Manuals
  4. Speaker System
  5. YSP-40D
  6. Owner's manual

Yamaha YSP-40D Owner's Manual

Hide thumbs Also See for YSP-40D:
Table of Contents

Advertisement

Quick Links

See also: Service Manual
B
YSP-40D
Digital Sound Projector
TM
OWNER'S MANUAL

Advertisement

Table of Contents
loading

Related Manuals for Yamaha YSP-40D

Summary of Contents for Yamaha YSP-40D

  • Page 1 YSP-40D Digital Sound Projector OWNER’S MANUAL...
  • Page 2 AND-YELLOW. fire, damage to this unit, and/or personal injury. Yamaha will not be held responsible for any damage resulting from use of this unit The wire which is coloured BLUE must be connected to the with a voltage other than specified.

  • Page 3: Table Of Contents

    Contents TUNE AID ............. 54 INTRODUCTION DRC MODE ............55 PRUNE LIST ............56 Overview ..............2 PRESET DELETE ..........56 Features ..............3 Using iPod™ ............57 Using this manual ..........5 Connection .............. 57 Supplied accessories ..........6 Controlling iPod™ ..........57 Controls and functions ..........

  • Page 4: Overview

    The YSP-40D projects sound beams containing surround sound information for the front right (R), front left (L), surround right (SR), and surround left (SL) speaker positions, which are reflected off the walls of your listening room before reaching the actual listening position.

  • Page 5: Features

    DVD player, VCR, cable TV tuner, and digital satellite tuner connected to this unit. DOCK terminal to connect a Yamaha iPod universal dock (such as the YDS-10, sold separately), which supports iPod In addition, the remote control is equipped with the macro...
  • Page 6 ” are trademarks of 1 Ltd. The “ ” logo and “Cinema DSP” are registered trademarks of YAMAHA Corporation. TruBass, SRS and the “ ” symbol are registered trademarks of SRS Labs, Inc. TruBass technology is incorporated under Manufactured under license from Dolby Laboratories.

  • Page 7: Using This Manual

    Using this manual Using this manual Notes • This manual describes how to connect and operate this unit. For details regarding the operation of external components, refer to the supplied owner’s manual for each component. • Operations in this manual use keys on the supplied remote control of this unit unless otherwise specified. •...

  • Page 8: Supplied Accessories

    Supplied accessories Supplied accessories Check that you have received all of the following parts. Remote control (×1) Fasteners (×4) Optical cable (×1) STANDBY/ON POWER POWER DOCK AUX1 AUX2 AUX3 INPUT1 MACRO SEARCH MEMORY AUTO VOL MODE SETUP INPUTMODE SLEEP Cable clamp (×1) Digital audio pin cable (×1) 5BEAM ST+3BEAM...

  • Page 9: Controls And Functions

    Controls and functions Controls and functions Front panel AUX 3 INTELLIBEAM MIC INPUT VOLUME STANDBY/ON AUX 3 INTELLIBEAM MIC INPUT VOLUME STANDBY/ON 1 Front panel display 6 VOLUME +/– Shows information about the operational status of this Controls the volume level of all audio channels (see unit.

  • Page 10: Front Panel Display

    Controls and functions Front panel display 1 HDMI indicator C NIGHT indicator Lights up when the signal of the selected input source is Lights up when one of the night listening enhancers is input at the HDMI IN jack(s). selected (see page 75). 2 TUNER indicators D SLEEP indicator Light up when this unit is receiving a DAB service...

  • Page 11: Rear Panel

    19). 0 DOCK terminal 3 HDMI OUT jack Connect the Yamaha iPod universal dock (such as YDS- Connect to the HDMI IN jack on your HDMI component 10, sold separately) (see page 57). such as a TV or a projector connected to this unit (see A DVD COAXIAL DIGITAL IN jack page 19).
  • Page 12 Controls and functions E VIDEO OUT jack Connect to the video input jack of your TV via a composite analog video connection to display the OSD of this unit (see page 20). F COMPONENT VIDEO OUT jacks Connect to the video input jacks of your TV via a component analog video connection to display the OSD of this unit (see page 20).

  • Page 13: Remote Control

    Controls and functions Remote control 1 Infrared window This section describes the functions of the remote control used to control this unit. Some buttons marked with an Outputs infrared control signals. Aim this window at the asterisk (*) share the common functions between the YSP component you want to operate.
  • Page 14 Controls and functions F DVD player/VCR control buttons S RETURN Control your DVD player or VCR (see pages 109 and Selects sleep timer settings or returns to the previous SET 110). MENU screen. G My Beam microphone T TV VOL +/– Collects the test tones from this unit when using the My Adjusts the volume level of your TV (see page 108).
  • Page 15 Controls and functions 1 SEARCH This section describes the functions of the remote control used to control DAB or iPod when the TV/AV mode is DAB: Switches between the DAB tuning modes selected with the operation mode selector (7). (see page 49). 2 Numeric buttons DAB: Enter numbers to select a preset DAB service.

  • Page 16: Installation

    Installation Installation This section describes a suitable installation location to install this unit using a metal wall bracket, a rack or a stand. Depending on your installation environment, connections with external components can be done before installing this unit. We recommend that you temporarily place and arrange all components, including this unit, in order to decide which procedure should come first.
  • Page 17 Installation Installation examples Example 1 Install this unit as close to the exact center of the wall as possible. Example 2 Install this unit so that the sound beams can be reflected off the walls. Example 3 Install this unit as close to the exact front of your normal listening position as possible.
  • Page 18 K30) to mount this unit on the wall in your listening room. commercially available rack. Metal wall bracket When this unit is installed above your TV This unit YSP-40D 24- 7x22 4- 7 When this unit is installed under your TV (mm)

  • Page 19: Connections

    Connections Connections This unit is equipped with the following types of audio/video input/output jacks/terminal: For audio input For audio output • 2 optical digital input jacks • 1 subwoofer output jack • 2 coaxial digital input jacks For audio/video output •...

  • Page 20: Before Connecting Components

    Connections Before connecting components Cables used for connections Affixing cables To prevent cables from becoming unplugged, place the supplied cable clamp with the open side facing upward, attach it to the rear Audio/Video panel of this unit in a suitable position, and then affix cables in the cable clamp.

  • Page 21: Connections Using Hdmi Cables

    Connections Connections using HDMI cables This unit is equipped with 2 HDMI input jacks and 1 HDMI output jack. If your TV and other components have HDMI jacks, use HDMI cables for simpler and easier connections, and you can skip the connection procedures from page 20 to 23.

  • Page 22: Connecting A Tv

    Connections Connecting a TV For audio connection, connect the analog audio output jacks on your TV to the TV/STB AUDIO IN jacks on this unit. If your TV has an optical digital output jack, connect the optical digital output jack on your TV to the TV/STB OPTICAL DIGITAL IN jack on this unit.

  • Page 23: Connecting A Dvd Player/Recorder

    Connections Connecting a DVD player/recorder For audio connection, connect the coaxial digital output jack on your DVD player/recorder to the DVD COAXIAL DIGITAL IN jack on this unit. When you connect this unit to your DVD/VCR combo player/recorder, connect the analog audio output jacks on your DVD/VCR combo player/recorder to the AUX 1 AUDIO IN jacks on this unit in addition to the coaxial digital audio connection.

  • Page 24: Connecting A Digital Satellite Tuner Or A Cable Tv Tuner

    Connections Connecting a digital satellite tuner or a cable TV tuner For audio connection, connect the optical digital output jack on your digital satellite tuner or cable TV tuner to the TV/ STB OPTICAL DIGITAL IN jack on this unit. Connect the analog audio output jacks on your digital satellite tuner or cable TV tuner to the TV/STB AUDIO IN jacks on this unit.

  • Page 25: Connecting A Digital Airwave Tuner

    Connections Connecting a digital airwave tuner For audio connection, connect the TV/STB AUDIO IN jacks on this unit to the analog audio output jacks on your TV. Connect the optical digital output jack on your digital airwave tuner to the TV/STB OPTICAL DIGITAL IN jack on this unit in addition to the analog audio connection.

  • Page 26: Connecting A Portable Audio Player

    Connections Connecting a portable audio player Connect the analog audio output jack on your portable audio player to the AUX 3 input jack on the front panel of this unit. Front panel of this unit AUX 3 INTELLIBEAM MIC INPUT VOLUME STANDBY/ON AUX 3...

  • Page 27: Connecting Other External Components

    Connections Connecting other external components If your component supports optical digital connections, connect the optical digital output jack on your component (e.g., DVD player/recorder) to the AUX 1 OPTICAL DIGITAL IN jack on this unit. If your component does not support optical digital connections, connect the coaxial digital output jack on your component to the AUX 2 COAXIAL DIGITAL IN jack on this unit.

  • Page 28: Connecting A Subwoofer

    Connections Connecting a subwoofer Connect the monaural input jack on your subwoofer to the SUBWOOFER jack on this unit. This connection alone does not output sound from the connected subwoofer. To output sound from the connected subwoofer, turn on the power of your subwoofer and then run AUTO SETUP (see page 34) or select SWFR for BASS OUT in SUBWOOFER SET (see page 86).

  • Page 29: Connecting The Dab Antenna

    Connections Connecting the DAB antenna Connect the supplied DAB antenna to the ANTENNA jack on this unit and secure the DAB antenna vertically in an unobtrusive location. It is recommended that you use TUNE AID (see page 54) when connecting the DAB antenna in order to maximize DAB reception capability.

  • Page 30: Connecting The Ac Power Supply Cable

    Connections Connecting the AC power supply cable Once all other connections are complete, plug one end of the AC power supply cable into the AC IN terminal of this unit and then plug the other end into the AC wall outlet. Rear panel of this unit IR-OUT AC IN...

  • Page 31: Getting Started

    GETTING STARTED Getting started Installing batteries in the remote Remove the transparent sheet before using the remote control. control Press Operation range of the remote control The remote control transmits a directional infrared beam. Use the remote control within 6 m (20 ft) of this unit and point it toward the remote control sensor of this unit during operation.

  • Page 32: Turning On This Unit Or Setting It To The Standby Mode

    Getting started Turning on this unit or Press STANDBY/ON again to set this unit to setting it to the standby mode the standby mode. Note When this unit is in the standby mode, only STANDBY/ON on the front panel or on the remote control is operational, and the other control buttons on the front panel or on the remote control are not operational until the power of this unit is turned on.

  • Page 33: Using Set Menu

    USING SET MENU Using SET MENU Displaying the OSD (on-screen display) This section describes how to display the OSD (on-screen display) of this unit on your TV screen and to set the parameters for your listening room. Once this is complete, you can enjoy real surround sound while watching TV in the comfort of your own home.

  • Page 34: The Flow Chart Of Set Menu

    Using SET MENU The flow chart of SET MENU The following diagram illustrates the overall flow of the setup procedure. Run LANGUAGE SETUP. See “Changing OSD language” on page 33. Run AUTO SETUP (IntelliBeam). See “AUTO SETUP (IntelliBeam)” on page 34. If an error occurs Look for a remedy.

  • Page 35: Changing Osd Language

    CHANGING OSD LANGUAGE Changing OSD language This feature allows you to select the language of your choice that appears in SET MENU of this unit. Set the operation mode selector to YSP. Press to select the desired language, and press ENTER. TV/AV ENTER ENTER...

  • Page 36: Auto Setup (Intellibeam)

    AUTO SETUP (INTELLIBEAM) AUTO SETUP (IntelliBeam) This unit creates a sound field by reflecting sound beams on the walls of your listening room and by broadening the cohesion of all the channels. Just as you would arrange the speaker position of other audio systems, you need to set the beam angle to enjoy the best possible sound from this unit.

  • Page 37: Installing The Intellibeam Microphone

    AUTO SETUP (IntelliBeam) Installing the IntelliBeam microphone The supplied IntelliBeam microphone collects and analyzes the sound that this unit produces in your actual listening environment. Follow the procedure below to connect the IntelliBeam microphone to this unit and make sure that the IntelliBeam microphone is placed in a proper location and that there are no large obstacles between the IntelliBeam microphone and the walls in your listening room.

  • Page 38: Using Auto Setup (Intellibeam)

    AUTO SETUP (IntelliBeam) Using AUTO SETUP (IntelliBeam) Once the IntelliBeam microphone is firmly connected to this unit and properly placed in your listening room, follow the procedure below to start the AUTO SETUP procedure. You can also enter the AUTO SETUP procedure simply by pressing and holding AUTO SETUP for more than two seconds.
  • Page 39 AUTO SETUP (IntelliBeam) Notes Press MENU. The SET MENU screen appears on your TV. • Make sure that your listening room is as quiet as possible while this unit is performing the AUTO SETUP procedure. • To achieve the best results possible, evacuate yourself from SET MENU your listening room until the AUTO SETUP procedure is completed so that you may not obstruct the path of sound...
  • Page 40 AUTO SETUP (IntelliBeam) Press to select BEAM+SOUND Check the following points once again before OPTIMZ, BEAM OPTIMZ only, or SOUND starting the AUTO SETUP procedure. OPTIMZ only and then press ENTER. • Is the IntelliBeam microphone firmly connected to this unit? The following screen appears on your TV.
  • Page 41 AUTO SETUP (IntelliBeam) Check that the following screen is displayed Press ENTER to confirm the results or press on your TV. RETURN to cancel the results. The results of the AUTO SETUP procedure are The following screen is displayed for two seconds displayed on your TV.
  • Page 42 If position/connection and re-try. the problem persists, contact the nearest authorized Yamaha service center for assistance. ERROR E-7 An internal system error occurred. Repeat the AUTO SETUP procedure.

  • Page 43: Using The System Memory

    USING THE SYSTEM MEMORY Using the system memory Convenient usage of the system Press to select MEMORY and press memory ENTER. The following screen appears on your TV. You can save the current settings adjusted in SET MENU in the system memory of this unit. It is handy to save certain settings according to the varying conditions of your listening environment.

  • Page 44: Loading Settings

    Using the system memory Loading settings Press to select MEMORY1, MEMORY2, or MEMORY3 and press ENTER. You can recall the settings saved in “Saving settings” on The following screen appears on your TV. page 41 according to the varying conditions of your listening environment.
  • Page 45 Using the system memory Press to select LOAD and press Press ENTER again. ENTER. The new parameters saved as MEMORY1, MEMORY2, or MEMORY3 are loaded. Once the The following screen appears on your TV. parameters are loaded, the display returns to the SET MENU screen.

  • Page 46: Playback

    PLAYBACK Playback Front panel operations Selecting the input source Press INPUT on the front panel repeatedly to You can play back sound from the components connected toggle between TV, STB, DVD, AUX1, AUX2, and to this unit simply by pressing INPUT on the front panel AUX3.

  • Page 47: Playing Back Sources

    Playback Press AUX1 (or AUX2) to play back a component connected to the AUX 1 (or AUX 2) jack on the Switch to the video input on your TV using rear panel of this unit. the remote control supplied with the TV and display the DVD menu screen.

  • Page 48: Adjusting The Volume

    Playback Muting the sound Adjusting the volume VOLUME TV VOL MUTE TV INPUT TV MUTE CODE SET Press MUTE to mute the sound. “AUDIO MUTE ON” appears in the front panel display, and the volume level indicator flashes. MUTE INPUT VOLUME STANDBY/ON VOLUME...

  • Page 49: Dab (Digital Audio Broadcasting)

    DAB (DIGITAL AUDIO BROADCASTING) DAB (Digital Audio Broadcasting) About DAB Ensemble DAB (Digital Audio Broadcasting), also known as digital radio, is a new way of radio broadcasting. DAB is broadcast using digital signals instead of analog signals, Service resulting in near CD-quality sound. Analog signals (i.e. AM/FM) are susceptible to interference (i.e.

  • Page 50: Preparing The Dab Tuning

    DAB (Digital Audio Broadcasting) Preparing the DAB tuning Press k / n / l / h to start the initial scan operation. Before tuning into DAB services, you must perform the This unit starts the scan for DAB ensembles. While initial scan.

  • Page 51: Dab Tuning

    DAB (Digital Audio Broadcasting) When you select PRESET, the PRESET indicator DAB tuning lights up in the front panel display. For DAB tuning, you do not tune in by station frequency (like FM/AM), but tune in via the channel label instead. There are five DAB tuning modes: ALPHANUMERIC, PRESET ACTIVE, ENSEMBLE, FAVOURITE, and PRESET.

  • Page 52: Preset Memory

    DAB (Digital Audio Broadcasting) PRESET MEMORY Use the numeric buttons to enter a preset number. The PRESET MEMORY mode is used to assign up to 99 For example, to assign “56” to the current DAB preset numbers to DAB services. service: Tune into the DAB service you would like to MY BEAM...
  • Page 53 DAB (Digital Audio Broadcasting) PRESET tuning If there is no service assigned to the preset numbers entered, the numbers entered followed by “EMPTY” With PRESET tuning, you can tune into DAB services by appears in the front panel display for one second. The entering the assigned preset DAB service number.

  • Page 54: Dab Service Information

    DAB (Digital Audio Broadcasting) DAB service information You can set the time for which the DAB service information is displayed on the video monitor by using the “OSD The DISPLAY key shows various information about the DISPLAY TIME” on page 93. service currently being broadcast.

  • Page 55: Accessing Dab Menu

    DAB (Digital Audio Broadcasting) Accessing DAB MENU INIT SCAN You can use the DAB MENU to adjust the DAB tuner INIT SCAN locates all of the DAB ensembles and parameters and ensemble/service registry list. There are services in your area. When this operation is selected, this five operations in DAB MENU: INIT SCAN, TUNE AID, unit scans the entire band and creates a registry list of DRC MODE, PRUNE LIST, and PRESET DELETE.

  • Page 56: Tune Aid

    DAB (Digital Audio Broadcasting) TUNE AID Press ENTER to confirm your selection. TUNE AID displays the strength of the DAB signal being received by this unit in the front panel display. Use TUNE AID to adjust the positioning of the indoor DAB antenna ENTER and this unit and discover which setup has the best reception state.

  • Page 57: Drc Mode

    DAB (Digital Audio Broadcasting) DRC MODE Press to switch between AUTO and OFF. Dynamic range is the decibel (dB) range between the DRC MODE:OFF highest and lowest sounds in a broadcast. Some DAB broadcasters transmit a wide dynamic range (enabling ENTER high quality sound), accompanied by DRC (Dynamic DRC MODE:AUTO...

  • Page 58: Prune List

    DAB (Digital Audio Broadcasting) PRUNE LIST PRESET DELETE Use PRUNE LIST to delete a group of inactive ensembles Use PRESET DELETE to delete specific unnecessary and services from the DAB registry list. services from the DAB registry list. Access DAB MENU by following steps 1 Access DAB MENU by following steps 1 through 4 as described in “Accessing DAB through 4 as described in “Accessing DAB...

  • Page 59: Using Ipod

    Using iPod™ This unit has the DOCK terminal on the rear panel that allows you to connect the Yamaha iPod universal dock (such as YDS-10, sold separately). Station your iPod in the Yamaha iPod universal dock, and use the supplied remote control to operate your iPod.
  • Page 60 • For a complete list of status messages that appear in the front panel display and in the OSD, see the “iPod” section in “Troubleshooting” on page 116. • While your iPod is stationed in the Yamaha iPod universal dock connected to the DOCK terminal of this unit, your iPod battery is automatically charged as long as this unit is turned on.
  • Page 61 ENTER time) in “OSD SET” (OSD settings) (see page 93). Notes • The Yamaha logo appears in the iPod screen in this mode. • Undisplayable characters are shown as underscores “_” in the front panel display and OSD. • You can change or adjust the “Settings” parameters only in the OSD.

  • Page 62: Enjoying Surround Sound

    ENJOYING SURROUND SOUND Enjoying surround sound You can enjoy multi-channel surround sound by changing the beam mode using the beam mode buttons on the remote control. Select 5 Beam, Stereo plus 3 Beam, 3 Beam, or My Surround for multi-channel playback. Notes •...

  • Page 63: Stereo Plus 3 Beam

    Enjoying surround sound Stereo plus 3 Beam Notes • When you play back multi-channel sources, surround left and Outputs normal sound from the front left and right right signals are mixed down and output from the front left and channels and sound beams from the center and surround right channels.
  • Page 64 Enjoying surround sound Decoder indicators Surround modes and recommended Depending on the input source and the selected surround sources mode, the indicators in the front panel display light up as Recommended follows: Surround mode source Status Indicator Dolby Pro Logic –...

  • Page 65: Enjoying 2-Channel Sources In Surround Sound

    Enjoying surround sound Enjoying 2-channel sources Press SUR. DECODE repeatedly (or press in surround sound SUR. DECODE and then press ) to switch between surround modes. This unit can decode 2-channel sources for 5.1-channel Choices: Neo:6 Cinema, Neo:6 Music, PRO LOGIC, playback so that you can enjoy a variety of surround sound PLII Movie, PLII Music, PLII Game effects by switching the surround mode.

  • Page 66: Enjoying Tv In Surround Sound

    Enjoying surround sound Enjoying TV in surround sound If you hear sound from your TV speakers, reduce the volume level of your TV until you You can enjoy analog audio signals output from your TV can no longer hear any audio being output. in real surround sound.

  • Page 67: Adjusting Surround Mode Parameters

    Enjoying surround sound When Dolby Pro Logic II Music is Adjusting surround mode selected parameters PANORAMA Gives the front left and right channel sound a You can configure the parameters for Dolby Pro Logic II wraparound effect, distributed throughout the entire Music and DTS Neo:6 Music to fine-tune the surround surround sound field to give you an expansive feeling.

  • Page 68: Enjoying Stereo Sound

    ENJOYING STEREO SOUND Enjoying stereo sound You can enjoy 2-channel and 5-channel stereo playback as the beam modes by pressing STEREO on the remote control. Notes • When you play back Dolby Digital audio signals in the 2-channel or 5-channel stereo playback, the dynamic range becomes compressed.

  • Page 69: Playing Back Sound Clearly (My Beam)

    PLAYING BACK SOUND CLEARLY (MY BEAM) Playing back sound clearly (My Beam) You can improve listenability in a noisy environment by changing the beam mode to My Beam, which outputs sound beams directly toward the listening position in a single channel. In addition, My Beam is also ideal when you do not want the sound beams to be reflected on the walls in your listening room or when you do not want to disturb other people while enjoying music or movies at night.

  • Page 70: Using Manual-Adjust Function

    Playing back sound clearly (My Beam) Using manual-adjust function You can adjust the beam angle manually while playing back an input source. This function is also ideal if the listening position is out of the operation guarantee range of the auto-adjust function. Set the operation mode selector to YSP.

  • Page 71: Using Sound Field Programs

    The acoustics in your room could be changed to those of a concert hall, a dance floor, or a listening room of virtually any size at all. This ability to create sound fields at will is exactly what Yamaha has done with...
  • Page 72 Using sound field programs Sound field program descriptions You can select from the following sound field programs based on your listening preference when you play music, movie or sports sources. For details on how to switch between the available sound field programs, see page 71. Note There is only one sports sound field program available.

  • Page 73: Cinema Dsp Programs

    Using sound field programs Music programs CINEMA DSP programs Select this CINEMA DSP program when you play back music sources. This program produces a vibrant You can select from three different CINEMA DSP atmosphere and lets you feel as if you are seated in an programs (MUSIC, MOVIE, and SPORTS) depending on actual rock or jazz concert hall.
  • Page 74 Using sound field programs Movie programs Sports program Select this CINEMA DSP program when you play back Select this CINEMA DSP program when you play back movie sources, especially the ones encoded in Dolby sports sources. This program densely concentrates the Digital, DTS, or Dolby Surround.
  • Page 75 Using sound field programs Turning off CINEMA DSP programs Press MUSIC, MOVIE, or SPORTS to select Turn off the CINEMA DSP programs if you want to enjoy the original sound without the CINEMA DSP program the desired CINEMA DSP program. effect.

  • Page 76: Using The Music Enhancer

    USING THE MUSIC ENHANCER Using the music enhancer You can use the Music Enhancer of this unit to improve the sound nearest to the original depth and width of compression artifacts such as the MP3 format. Press ENHANCER repeatedly to switch MUSIC MOVIE SPORTS...

  • Page 77: Using The Volume Mode (Night Listening Enhancer/Tv Volume Equal Mode)

    USING THE VOLUME MODE (NIGHT LISTENING ENHANCER/TV VOLUME EQUAL MODE) Using the volume mode (Night listening enhancer/TV volume equal mode) The night listening enhancers are designed to improve listenability at lower volumes or at night. In addition, you can limit the volume level of the TV so that it will not vary suddenly to a great extent whenever the contents being broadcast change (i.e.

  • Page 78: Using The Sleep Timer

    USING THE SLEEP TIMER Using the sleep timer Use this feature to automatically set this unit to the standby mode after a specified period of time. The sleep timer is useful if you are going to sleep after a certain amount of time while this unit is still playing back a source. Each time you press SLEEP, the front panel display changes as shown below.
  • Page 79 Using the sleep timer Canceling the sleep timer Set the operation mode selector to YSP. TV/AV Press SLEEP repeatedly until “SLEEP OFF” appears in the front panel display. SLEEP Wait for a few seconds without operating this unit to confirm the setting for the sleep timer. The SLEEP indicator disappears from the front panel display, indicating that the sleep timer is deactivated.

  • Page 80: Displaying The Input Source Information

    DISPLAYING THE INPUT SOURCE INFORMATION Displaying the input source information You can display the format and sampling frequency of the current input signal in the front panel display. Press DISPLAY. SUR. DECODE The information on the current input signal is displayed as follows: ENHANCER ENTRY...

  • Page 81: Using The Hdmi Control Feature

    USING THE HDMI CONTROL FEATURE Using the HDMI control feature You can operate the following functions using the remote control supplied with your TV if this unit and an HDMI control-compatible TV (except some models) are connected via HDMI. • Turning on or off the power (synchronized operation with the TV) •...

  • Page 82: Manual Setup

    MANUAL SETUP MANUAL SETUP To achieve the best quality surround sound, you can use MANUAL SETUP to fine-tune the listening environment parameters, as well as to make advanced settings for sound signals, sound beams, digital input, and the OSD. Change the initial settings (indicated in bold under each parameter) to reflect the needs of your own listening environment.

  • Page 83: Using Manual Setup

    MANUAL SETUP Using MANUAL SETUP Press to select MANUAL SETUP and press ENTER. Use the remote control to access and adjust each The following screen appears on your TV. parameter. MUSIC MOVIE SPORTS SUR. DECODE ENTER ENTER ENHANCER ENTRY MENU TV/AV ENTER DISPLAY...

  • Page 84: Beam Menu

    MANUAL SETUP ANGLE TO WALL BEAM MENU FLAT TO WALL OR CORNER Use to manually adjust the various parameters related to the sound beam output. SET MENU → MANUAL SETUP → BEAM MENU 2)BEAM MENU A)SETTING PARAMETERS B)BEAM ADJUSTMENT C)IMAGE LOCATION •...
  • Page 85 MANUAL SETUP INSTALLED HEIGHT • Select ANGLE TO WALL OR CORNER if this unit is installed in the corner of your listening room. Adjust (Installed height of this unit) the width and length of your listening room as well as Use to adjust the installed height of this unit.
  • Page 86 MANUAL SETUP HORIZONTAL ANGLE (Horizontal angle) BEAM TRAVEL LENGTH (Beam travel length) Use to adjust the horizontal angle of sound beams for each A certain amount of delay must be applied to the sound channel. By adjusting the horizontal angle of the sound from each channel so that all sounds can arrive at the beams, you can optimize the sound beam paths.
  • Page 87 MANUAL SETUP FOCAL LENGTH (Focal length) TREBLE GAIN (Treble gain) Use to set the distance from the front of this unit to the Use to adjust the high-frequency output level of each focal point of output for each channel to achieve an channel.

  • Page 88: Sound Menu

    MANUAL SETUP IMAGE LOCATION (Image location) SOUND MENU Use to adjust the direction from which the front left and right channel sound is heard so that each sound can be Use to manually adjust the various parameters related to heard closer to the center channel. the sound output.
  • Page 89 MANUAL SETUP BASS OUT (Bass out) AUDIO DELAY (Audio delay) Low-frequency (bass) signals can be directed to the Use to delay the sound output and synchronize it with the subwoofer and/or the front left and right channels. This video image. This may be necessary when using certain setting also determines the routing of LFE (low-frequency LCD monitors or projectors.

  • Page 90: Input Menu

    MANUAL SETUP DD/DTS Dynamic Range INPUT MENU (Dynamic range of Dolby Digital and DTS signals) Use to manually adjust the various parameters related to Use to select the amount of dynamic range compression. the audio and video input. This setting is effective only when the unit is decoding SET MENU →...
  • Page 91 MANUAL SETUP INPUT TRIM (Input trim) Use to adjust the input level of the input source. A)INPUT ASSIGNMENT 1/3 HDMI HDMI1;;;; AUX1 AUX1 C)INPUT TRIM 1/2 HDMI2;;;; DVD TV/STB ANALOG;;;-3.0dB [ ]/[ ]:Up/Down [ ]/[ ]:Sel DIGITAL;;-3.0dB [ENTER]:Return DIGITAL;;-3.0dB [ ]/[ ]:Up/Down [ ]/[ ]:Sel [ENTER]:Return •...
  • Page 92 Use to select whether to play back HDMI audio signals on this unit or on another HDMI component connected to the HDMI OUT jack of this unit. ENTER Choices: YSP-40D, OTHER a)SUPPORT AUDIO Press to select the desired character. YSP-40D OTHER •...
  • Page 93 MANUAL SETUP VIDEO INFO (Video information) Notes Use to display the video information of the current input signal. • When “MONITOR CHECK” is set to “YES”, this unit receives Choices: HDMI SIGNAL, HDMI RES., HDMI ERROR the information of the available video signal resolutions from the video monitor connected via HDMI and you can only select the resolutions supported by the video monitor in “UP- b)VIDEO INFO...

  • Page 94: Display Menu

    MANUAL SETUP DISPLAY MENU e)HDMI CONTROL Use to manually adjust the various parameters related to the display. XXXXXXX SET MENU → MANUAL SETUP → DISPLAY MENU XXXXXXXXXXXXXXXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXXXXXXXXXXXXXXX [ ]/[ ]:Select [ENTER]:Return 4)DISPLAY MENU A)F.DISPLAY SET B)OSD SET • Select ON to enable the HDMI control. The signals C)UNIT SET input at the HDMI IN jacks are output at the HDMI [ ]/[ ]:Up/Down...
  • Page 95 MANUAL SETUP OSD SET (OSD settings) Use to adjust the display position and to set the display time of the OSD. B)OSD SET OSD SHIFT;;;;;;;;;;0 OSD DISPLAY TIME;;;ON [ ]/[ ]:Up/Down [ ]/[ ]:Sel [ENTER]:Return OSD SHIFT (OSD shift) Use to adjust the vertical position of the OSD. Adjust toward the –...

  • Page 96: Adjusting The Audio Balance

    Adjusting the audio balance Adjusting the audio balance You can adjust the sound beam output level of each channel by using the test tone or the audio output being played back in each beam mode to achieve a more true-to-life surround sound experience. Using the test tone Press to select the channel you want...

  • Page 97: Using The Audio Output Being Played Back

    Adjusting the audio balance Press TEST when you have completed all Set the operation mode selector to YSP. your adjustments. TV/AV TEST Press CH LEVEL repeatedly (or press CH LEVEL and ) to select the channel Notes you want to adjust. The front panel display changes as follows.
  • Page 98 Adjusting the audio balance Press to adjust the channel volume. ENTER Control range: –10.0 dB to +10.0 dB Wait for a few seconds without operating this unit when you have completed your adjustment. Notes • All channel levels cannot be adjusted when the 2-channel or 5-channel stereo playback (see page 66), or My Surround (see page 61) is selected as the beam mode.

  • Page 99: Selecting The Input Mode

    Selecting the input mode Selecting the input mode You can select the type of audio input signals of the selected input source according to your preference or the conditions of the input source. This function is available for TV/STB, DVD, AUX1, and AUX2. We recommend setting the input mode to AUTO in most cases.

  • Page 100: Adjusting The System Parameters

    Adjusting the system parameters Adjusting the system parameters This unit has additional menus that are displayed in the front panel display. These menus offer additional operations to adjust and customize the way this unit operates. Note When “F.PANEL KEY” is set to “F.PANEL: OFF” (see page 104), STANDBY/ON on the front panel is ineffective. Use STANDBY/ON on the remote control instead to adjust the system parameters.

  • Page 101: Setting The Memory Protect

    Adjusting the system parameters Setting the MEMORY PROTECT Press to switch between “PROTECT: ON” and “PROTECT: OFF”. You can protect the settings you saved in the system memory of this unit from being accidentally erased or unwantedly changed. ENTER Repeat steps 1 to 3 in “Using the system parameters”...

  • Page 102: Setting The Max Volume

    Adjusting the system parameters Setting the MAX VOLUME Press to adjust the maximum volume level. You can set the maximum volume level so that this unit will not output sound beyond the limited volume level. Repeat steps 1 to 3 in “Using the system ENTER parameters”...

  • Page 103: Setting The Monitor Check

    Adjusting the system parameters Setting the MONITOR CHECK Press so that “TURN ON VOLUME” is displayed in the front panel display. Use this feature to activate or deactivate the monitor check function of this unit. When this parameter is set to “YES”, this unit receives the information on the available video signal resolutions from the video monitor connected via ENTER...

  • Page 104: Setting The Demo Mode

    Adjusting the system parameters Setting the DEMO MODE Press to switch between “MON CHK: YES” and “MON CHK: SKIP”. You can test the sound beam output from this unit to experience the sound beam. Repeat steps 1 to 3 in “Using the system ENTER parameters”...

  • Page 105: Setting The Panel Input Key

    Adjusting the system parameters Setting the PANEL INPUT KEY Press to switch between “DEMO: ON” and “DEMO: OFF”. You can disable the INPUT on the front panel when you adjust the system parameters. Repeat steps 1 to 3 in “Using the system ENTER parameters”...

  • Page 106: Disabling The Front Panel Keys

    Adjusting the system parameters Disabling the front panel keys Press to switch between “P.INPUT: ON” and “P.INPUT: OFF”. You can disable the front panel keys except when you adjust the system parameters. Repeat steps 1 to 3 in “Using the system ENTER parameters”...

  • Page 107: Setting The Factory Preset

    Adjusting the system parameters Setting the FACTORY PRESET Press to switch between “F.PANEL: ON” and “F.PANEL: OFF”. You can reset all of the parameters of this unit to the factory presets. This procedure completely resets ALL the parameters in SET MENU. ENTER Note After performing the following procedure you must run AUTO...
  • Page 108 Adjusting the system parameters Press to switch between “PRESET: RESET” and “PRESET: CANCEL”. ENTER • Select PRESET: RESET to reset all of the current settings. • Select PRESET: CANCEL to cancel the resetting procedure. Press STANDBY/ON on the remote control to set this unit to the standby mode.

  • Page 109: Remote Control Features

    Remote control features In addition to controlling this unit, the remote control can also operate other AV components made by Yamaha and other manufacturers. To control other components, you must set up the remote control with the appropriate remote control codes and set the operation mode selector to TV/AV to change the control area.

  • Page 110: Controlling Other Components

    Remote control features Controlling other components 1 Numeric buttons Operating your TV Selects a TV channel for playback. Set the operation mode selector to TV/AV, and 2 CH +/– press TV to select TV as the input source. Switches between the available TV channels. The control area of the remote control changes to the TV operation mode.
  • Page 111 Remote control features Operating your DVD player/recorder Operating your STB (CATV/Satellite tuner) Set the operation mode selector to TV/AV and press DVD to select DVD as the input source. Set the operation mode selector to TV/AV and The control area of the remote control changes to the DVD press STB to select STB as the input source.
  • Page 112 Remote control features Operating your VCR Set the operation mode selector to TV/AV and press AUX1 to select VCR as the input source. The control area of the remote control changes to the AUX1 operation mode. This operation is available when your VCR is connected to the AUX 1 AUDIO IN jacks on this unit.

  • Page 113: Using The Tv Macro

    Remote control features Setting macros for the TV with the Using the TV macro tuning capability The TV macro feature makes it possible to perform a Press and hold CODE SET and press one of series of operations with the press of a single button. For the input selector buttons to select the input example, when you want to play a DVD, you would source you want to set macros for.
  • Page 114 Remote control features Setting macros for the TV without the Operating macros tuning capability Press and hold one of the input selector buttons Press and hold CODE SET and press one of for approximately two seconds to select the input the input selector buttons to select the input source you want to operate macros for.

  • Page 115: Troubleshooting

    Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not listed below or if the instruction below does not help, set this unit to the standby mode, disconnect the AC power supply cable, and contact the nearest authorized Yamaha dealer or service center. General...
  • Page 116 2-channel audio signals at the source component such as a DVD player. “SUPPORT AUDIO” is set to “YSP-40D”. Set “SUPPORT AUDIO” to “OTHER”. There is noise interference This unit is too close to the digital or high- Move this unit farther away from such —...
  • Page 117 Troubleshooting Remote control Problem Cause Remedy page The remote control does not Wrong distance or angle. The remote control functions within a work and/or function maximum range of 6 m (20 ft) and no more properly. than 45 degrees off-axis from the front panel.
  • Page 118 Connect error There is a problem with the signal path Turn off this unit and reconnect the Yamaha iPod from your iPod to this unit. universal dock to the DOCK terminal of this unit. Try resetting your iPod.

  • Page 119: Glossary

    Glossary Glossary Dolby Digital DTS Digital Surround Dolby Digital is a digital surround sound system that gives DTS digital surround was developed to replace the analog you completely independent multi-channel audio. With 3 soundtracks of movies with a 6-channel digital sound front channels (left, center, and right) and 2 surround track, and is now rapidly gaining popularity in movie stereo channels, Dolby Digital provides 5 full-range audio...
  • Page 120 Glossary LFE 0.1-channel This channel is for the reproduction of low bass signals. The frequency range for this channel is 20 Hz to 120 Hz. This channel is counted as 0.1 because it only enforces a low-frequency range compared to the full-range reproduction by the other 5/6 channels in Dolby Digital or DTS 5.1/6.1-channel systems.

  • Page 121: Dab Frequency Table

    DAB frequency table DAB frequency table Band III Frequency Channel label 218.640 MHz 220.352 MHz 222.064 MHz 223.936 MHz 225.648 MHz 227.360 MHz 229.072 MHz...

  • Page 122: Index

    Index Index Numerics 3 Beam................61 MANUAL SETUP............80 5 Beam................60 MEMORY............... 41 Movie program ............... 72 Music program..............71 AC power supply cable........... 28 My Beam ................ 67 Audio pin cable............... 18 AUTO SETUP (IntelliBeam) ......... 34 Night listening enhancer ..........75 Battery ................

  • Page 123: Specifications

    Specifications Specifications AMP SECTION DAB SECTION • Tuning Range • Maximum Output Power (JEITA) ................218 to 230 MHz ..........2 W (1 kHz, 10% THD, 4 Ω) × 40 20 W (100 Hz, 10% THD, 4 Ω) × 2 • Sensitivity ..................
  • Page 124 (http://www.yamaha-hifi.com/ or http://www.yamaha-uk.com/ for U.K. resident). The product is guaranteed to be free from defects in workmanship or materials for a period of two years from the date of the original purchase. Yamaha undertakes, subject to the conditions listed below, to have the faulty product or any part(s) repaired, or replaced at Yamaha’s discretion, without any charge for parts or labour.

  • Page 125: List Of Remote Control Codes

    321, 331, 341, SYLVANIA 397, 325, 326, 328 FURGUSON 223, 265, 266 WARDS 297, 239, 232, 216 351, 363 SYMPHONIC 397 FIRST LINE YAMAHA 299, 292, 242, GOODMANS 334, 337 TANDBERG FISHER 295, 233 285, 287, 253, 206 GRUNDIG 332, 338 TANDY...
  • Page 126 744, 792, 793 SCIENTIFIC ATLANTA 752, 753, 754, 789 SONY 756, 757 TOCOM UNIVERSAL 769, 772, 773, 774, 775 VIEWSTAR 764, 766, 776, 777, 778, 779, 782 SATELLITE TUNER ECHOSTAR 837, 838, 839 GENERAL INSTRUMENT HITACHI HUGHES 843, 844, 845, 846 MAGNAVOX PANASONIC 826, 829...
  • Page 127 YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD18 7GQ, ENGLAND YAMAHA SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN YAMAHA MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA...
  • Page 128 2 OSD video pin cable 5 AC power supply cable (Connects this unit to the AC wall outlet) (Displays the DVD digital video the YSP-40D menu (Displays the DVD analog video the YSP-40D menu (Connects this unit to the AC wall outlet)
  • Page 129 Continued from the front Carry out the AUTO SETUP (IntelliBeam) Enjoying surround sound Set the operation mode selector Press ENTER to start the AUTO to YSP. SETUP procedure, and then Carry out the AUTO SETUP to adjust the settings that best match your This unit switches to the YSP operation mode.

Table of Contents