Table of Contents
Advertisement
_
Electronic Viewfinder Indications
The tape remaining and battery charge level can be displayed during recording.
Battery Charge
Remaining:
Tape
Remaining:
-W- (No tape)
E3
FULL
• It will take several seconds lor the tape
remaining indicator to operate after the
tape starts moving.
Recording the Date and Time
1
Set the POWER
switch to CAMERA.
Press DISPLAY repeatedly
to select the desired display.
EVF Indications
1
Set the POWER
switch to CAMERA.
When placed in
Record mode, the
time and date will be
recorded on the
tape.
2
Press DISPLAY
(
1XBDE3MD
twice to change
r
1XBDQMD
S?T
REC
the display to date
REC
only. Press once
or twice more to
remove the date/
_
time display.
^ MN
1 1#*7
J
Only the Date and/or Time indications are recorded on the Tape.
Display-Off' Mode
This feature allows you to remove all Electronic Viewfinder
Indications except Intelligent Titter (see page 34).
Before inserting a tape, press DISPLAY and STOP
together for more than one second to remove the
indications except time and date*.
To display the Electronic Viewfinder Indications again,
turn the Palmcorder Power off and then on again.
* To remove the time and date, press the DISPLAY button
repeatedly.
15
Advertisement
Table of Contents
