Table of Contents
Advertisement
Installing the Switch
Installation Procedures
Rack Mounting the Switch 2510G-48
1.
Figure 2-6. Example of attaching mounting brackets
N o t e
The mounting brackets have multiple mounting holes and can be rotated
allowing for a wide variety of mounting options. These include mounting the
switch so its front face is flush with the face of the rack, or mounting it in a
more balanced position as shown in the illustration.
2.
Figure 2-7. Example of mounting in a rack
2-12
Use a #1 Phillips (cross-head) screwdriver and attach the mounting
brackets to the switch with the included 8-mm M4 screws.
8 mm
M4 screws
Hold the switch with attached brackets up to the rack and move it
vertically until rack holes line up with the bracket holes, then insert and
tighten the four number 12-24 screws holding the brackets to the rack.
Install 12-24
screws
Hide quick links:
Advertisement
Table of Contents
