DO ALL RUNTIME AND TRANSMITTER PROGRAMMING BEFORE CONNECTING ANY ADDITIONAL
INPUTS SUCH AS, –INTERCOM, BEAMS ETC.
NOTE- IR beams must be fitted if DTS 624 motor is installed.
DO NOT CONNECT 220V DIRECTLY TO PCB
Dipswitch selections to activate a function.
Dipswitch 1 - Programming.
2 - Motor direction. (This can only be changed before programming or if neither limit
3 – Auto close.
4 – Condominium mode.
5 – P.I.R.A.C. mode
6 – Slow down distance change
Dipswitch selection for programming. (With dipswitch 1 ON)
Dipswitch 3 – Auto close. (Infra red beams must be fitted if auto close is activated).
Dipswitch 4 – Pedestrian (Distance and time).
switches are activated).
6