Check The Machine Type Setting; Setting The Machine Type - EWM Wega 401 M1.02 FKG Operating Instructions Manual

Rectifying faults

Check the machine type setting

7.2 Check the machine type setting
Only with the M2.xx machine control.
After switching on, the machine type that has been set is displayed for a short time,
denoted as "tyP".
If the machine type displayed does not match the machine, you have to correct this
setting.
„tyP 00" Saturn 251
„tyP d00" Saturn 256
„tyP 01" Saturn 301
„tyP r01" Mira 301 (M2.xx)
„tyP 02" Saturn 351
„tyP d02" Wega 351, Saturn 351 DG
„tyP d03" Wega 401,451
„tyP d04" Wega 501,601
7.2.1

Setting the machine type

Operating
element
+
m/min
58
Action Result
Switch off the welding machine.
1 x
Press and hold both buttons.
Switch on the welding machine, "Anl" is shown on the display.
1 x
Whilst "Anl" is being displayed, set the machine type:
0 Saturn 251 KGE
1 Saturn 301 KGE
2 Saturn 351 KGE
3 decompact (DK), all; Wega, all
7 Mira 301 KGE
NOTE
099-005224-EW501
08.11.2011