Planet SGS-5220-24P2X User Manual page 212

L2+24-port 10/100/1000t+4-port shared sfp+2-port 10g sfp+ managed stackable switch sgs-5220 series
Hide thumbs Also See for SGS-5220-24P2X:
Table of Contents

Advertisement

 IP Protocol Value
 IP TTL
 IP Fragment
 IP Option
 SIP Filter
 SIP Address
 SIP Mask
 DIP Filter
When "Specific" is selected for the IP protocol value, you can enter a specific
value. The allowed range is 0 to 255. A frame that hits this ACE matches this IP
protocol value.
Specify the Time-to-Live settings for this ACE.
zero: IPv4 frames with a Time-to-Live field greater than zero must not be
able to match this entry.
non-zero: IPv4 frames with a Time-to-Live field greater than zero must be
able to match this entry.
Any: Any value is allowed ("don't-care").
Specify the fragment offset settings for this ACE. This involves the settings for the
More Fragments (MF) bit and the Fragment Offset (FRAG OFFSET) field for an
IPv4 frame.
No: IPv4 frames where the MF bit is set or the FRAG OFFSET field is
greater than zero must not be able to match this entry.
Yes: IPv4 frames where the MF bit is set or the FRAG OFFSET field is
greater than zero must be able to match this entry.
Any: Any value is allowed ("don't-care").
Specify the options flag setting for this ACE.
No: IPv4 frames where the options flag is set must not be able to match
this entry.
Yes: IPv4 frames where the options flag is set must be able to match this
entry.
Any: Any value is allowed ("don't-care").
Specify the source IP filter for this ACE.
Any: No source IP filter is specified. (Source IP filter is "don't-care".)
Host: Source IP filter is set to Host. Specify the source IP address in the
SIP Address field that appears.
Network: Source IP filter is set to Network. Specify the source IP address
and source IP mask in the SIP Address and SIP Mask fields that appear.
When "Host" or "Network" is selected for the source IP filter, you can enter a
specific SIP address in dotted decimal notation.
When "Network" is selected for the source IP filter, you can enter a specific SIP
mask in dotted decimal notation.
Specify the destination IP filter for this ACE.
Any: No destination IP filter is specified. (Destination IP filter is
"don't-care".)
Host: Destination IP filter is set to Host. Specify the destination IP address
in the DIP Address field that appears.
Network: Destination IP filter is set to Network. Specify the destination IP
address and destination IP mask in the DIP Address and DIP Mask fields
212
User's Manual of SGS-5220 Series

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sgs-5220-24t2x

Table of Contents