Planet SGS-5220-24P2X User Manual page 347

Step 1: linking the switches by CB-DASFP-0.5M stack cable.
Step 2: Check the Master LED of each SGS-5220 Series switch to find out the Master Switch that is elected automatically by
the stack operation.
Step 3: Use the Web browser such as IE 7.0 to login the Master Switch, the default IP address is 192.168.0.100. Or you can use
the PLANET Smart Discovery Utility to find out the IP address of the stack group.
Figure 4-19-11 Use PLANET Smart Discovery Utility to display the IP address of stack master
Step 4: Choose "Stack \ Stack Configuration" from menu tree. You can see the Stack had established automaticatlly. As the
below screen appears:
The Switch ID is automatically assigned to the switches
1.
All switches are with same Priority value "3".
2.
The one can't be deleted is the Stack master.
3.
Example 1: We wish to make the SGS-5220 Series switch with MAC "00-30-4f-b8-e7-c3" / Switch ID=1 swap the Switch ID to 4.
 Select the switch with ID=1 and assign a new ID for this unit, for example: ID=4.
 Apply the settings with Apply button.
Figure 4-19-12 Stack Configuration
347
User's Manual of SGS-5220 Series