Tilt Up, Tilt Down And Shallow Water Operation - TOHATSU MFS 4C Owner's Manual

ENOW00204-0
WARNING
Excessive trim up or down may lead to
unstable boat operation, potentially caus-
ing the steering difficulty that leads to acci-
dent during cruising.
 Do not cruise at high speed if improper
trim position is suspected. Stop the boat
and readjust trim angle before continu-
ing cruise.
ENON00403-0
Note
Stop the engine before adjusting trim angle.
ENOM00060-0
8. Tilt up, tilt down and shallow
water operation
ENOW00048-0
WARNING
When tilting up or down, be careful not to
p l a c e y o u r h a n d b e t w e e n t h e s w i v e l
bracket and the stern bracket.
Be sure to tilt the outboard motor down
slowly.
ENON00018-0
Note
Stop the engine before tilting up.
ENOM00423-0
Tilt up
With the shift lever in Forward, fully tilt the
motor up toward you by holding the tilt
handle provided at the rear of the top
cowl. Then slightly lower the motor for
locking in the up position.
1. Tilt up position
2. Tilt stopper
3. Shallow water running position
ENOM00424-0
Tilt down
Slightly tilt the motor up, and pull the tilt
lever toward you to release the tilt-lock.
Then lower the motor slowly.
1. Tilt lever
ENOF00441-0 2. Tilt stopper
ENGINE OPERATION
1
3
35
2
ENOF00442-0
1
2
ENOF00443-0