Tilt Up, Tilt Down And Shallow Water Operation - TOHATSU M 25H Owner's Manual

42
ENGINE OPERATION
Higher
�������
!
5
• Do not put hand or finger in
between outboard motor body and
clamp bracket when adjusting trim
angle to prevent injury in case the
outboard motor body falls.
• Unsuitable trim position can cause
loss of control of boat.
When testing a trim position, run
boat slow initially to see if it can be
controlled safely.
�������
!
Excessive trim up or down may lead
to unstable boat operation, potentially
causing the steering difficulty that
leads to accident during cruising.
• Do not cruise at high speed if
improper trim position is suspected.
Stop the boat and readjust trim
angle before continuing cruise.
Thrust rod
Lower
■
Push the reverse lock lever down until it
stops. (This is the tilt up position.) Now,
tilt the outboard motor all the way up
until it is locked in place.

6. Tilt up, tilt down and shallow water operation

�������
!
When tilting up or down, be careful not
to place your hand between the swivel
bracket and the stern bracket.
Be sure to tilt the outboard motor
down slowly.
Note
Stop the engine before tilting up.
Tilt up
Reverse lock lever