Ricoh MP C2011 Manual page 146

9. Troubleshooting
Messages
"Paper size and type are
mismatched. Select another
tray from the following and
press [Continue]. To cancel
job, press [Job Reset].
Paper size and type can
also be changed in User
Tools."
"Paper size of n is
mismatched. Select another
tray from the following and
press [Continue]. Paper
type can also be changed
in User Tools."
(A tray name is placed at
n.)
"Printer font error."
"Cannot print because both
the main and designation
(chapter) sheets are set to
the same paper tray. Press
[Job Reset] to cancel the
job. To print the job again
specify different trays."
144
Causes
The printer driver settings are
incorrect or the tray does not
contain paper of the size or
type selected in the printer
driver.
The size of the paper in the
tray does not match the paper
size specified in the printer
driver.
An error has occurred in the
font settings.
The tray selected for other
pages is the same as the one
for slip sheets.
Solutions
• Check that the printer driver
settings are correct, and then
load paper of the size selected in
the printer driver into the input
tray. For details about how to
change the paper size, see
"Changing the Paper Size",
Paper Specifications and Adding
Paper.
• Select the tray manually to
continue printing, or cancel a
print job. For details about how
to select the tray manually, or
cancel a print job, see "If an
Error Occurs with the Specified
Paper Size and Type", Print.
Select a tray containing paper that is
the same size as the specified paper
size.
Contact your service representative.
Reset the job. Be sure the tray you
select for slip sheets is not providing
paper for other pages.