ASSEMBLY INSTRUCTIONS
Turntable and Mounting System In-
stallation
To install the turntable remove the four nuts
underneath holding the mounting bolts in
place. Align the bolts with the holes in the
turntable pin. Secure them with the included
allen wrech.
NOTE: Apply the turntable brake and it will
be easier to align the bolts and holes.
String Clamp Installation
The post of the string clamp and tube of the string
clamp base are treated with grease to provide protec-
tion against corrosion during shipping. Remove any
excessive grease with a clean cloth prior to use. The
post and tube may also be cleaned with isopropyl
alcohol. After this type of thorough cleaning, the post
and tube should be treated with a light coating of
machine oil to protect the surfaces against corrosion
and to ensure smooth operation.
7