Gamma 8800 Els Owner's Manual page 6

ASSEMBLY INSTRUCTIONS
Height Adjustment
The height of the machine is adjustable from
39" to 46". To change the height, remove the
socket head cap screw from its current posi-
tion and place it in the appropriate hole to set
the desired height of the machine.
Stand Upper Post Installation
With the height adjustment cap screw on the
upper post facing the brake lever & string
length meter, align the 6 holes marked "X" in
the upper post flange with the holes in the
slide brackets of the machine base.
Stand Upper Post Installation (cont.)
Secure the flange to the base with the six cap
screws or the rubber feet.
USE CAUTION WHEN SECURING
SCREWS TO SLIDING BRACKETS, THEY
WILL STRIP.
5