Alaxala AX6300S Quick Start Manual page 39

When using the Switch at 200 V AC
(Using a 200 V AC power cable you have obtained)
1. Remove the bracket that prevents disconnection of the power cable, which is
attached to the power supply unit. For details about removing the bracket that
prevents disconnection of the power cable, see the AX6300S Hardware
Instruction Manual.
2. Connect the 200 V AC power cable to all power supply units of the Switch.
Always use a grounded power outlet for the Switch. Using the Switch
without grounding could result in electric shock or failures due to
electrical noise.
When using the Switch in a 200 V AC environment, use only the
separately sold ALAXALA power cable or a power cable that meets
ALAXALA specifications. Using another cable could result in fire or
electric shock. In addition, do not use the supplied power cable with
another switch. Doing so could result in fire or electric shock.
CAUTION Before connecting the power cable, set the power switch of the power
supply unit you are installing to OFF.
When using the Switch at −48 V DC
Connect the −48 V DC power cable to all power supply units of the Switch. For
details about how to connect the −48 V DC power cable, see the AX6300S
Hardware Instruction Manual.
2. Installing Switch
13