Receipt/Journal Printer; Receipt/Journal/Validation Printer; Receipt/Validation Printer - Ithaca PcOS 90Plus Series Programmer's Manual

General Descriptions
The receipt printer does not have the ability to validate or handle slips. Commands that operate validation and
slip modes of other Series 90PLUS Printers will not function.

2.4 Receipt/Journal Printer

The Model 92PLUS receipt/journal printer adds the journal feature to the Model 91PLUS receipt printer. The
journal take-up is able to rewind the second copy of the 3.5-inch diameter 2-ply paper roll (125 feet).
The receipt/journal printer does not have the ability to validate or handle slips. Commands that operate
validation and slip modes of other Series 90PLUS Printers will not function.

2.5 Receipt/Journal/Validation Printer

The Model 93PLUS printer adds an independent validation capability to the Model 92PLUS. There are two
methods of form validation on the Model 93PLUS.
1. Top insertion validation. The form is inserted from the top and extends out the left side and/or top of the
printer. It rests on a fixed form stop. Under software control, printing can be from a minimum of two lines
to a maximum of 17 lines at 42 characters. Throughout this manual, top insertion will be termed
"Validation Mode."
2. Front inserted validation. The form is inserted from the front and extends out the left side and/or front of
the printer. In front insertion mode, the form is loaded to the first line of print under firmware control.
Printing then begins from the top of the form down. Throughout this manual, front insertion will be
termed "Slip Mode."
All Series 90PLUS validation printers have both validation and slip modes. The validation/slip movement is
independently controlled from the movement of the receipt and journal. Either can be moved alone or in sync
with the receipt/journal movement. The validation/slip movement will be under software control but set to
independent validation by default.

2.6 Receipt/Validation Printer

The Model 94PLUS receipt/validation printer adds validation to the Model 91PLUS described above. The
Model 94PLUS is a Model 93PLUS without journal take-up.
Page 4
PcOS Series 90PLUS
Rev M
Programmer's Guide
12/16/99