8
. S
& P
ERVICE
8.1
T
ROUBLESHOOTING
N
P
O
OWER
Check to see that the power cord is fully plugged into the back of the cross-trainer and into the wall. Make sure the
power switch is turned on and that the power cord is fully seated into the back of the cross-trainer.
H
P
S
AND
ULSE
ENSORS
Hand pulse sensors can work differently with different body types. With some individuals it can be very difficult to extract
a heart rate reading. Follow the below tips to improve the heart rate reading.
Remove your hands from the heart rate sensors and wait for the heart rate display to clear.
•
Grasp sensors again.
Make sure hands are fully contacting the sensors.
•
Dry hands periodically during use.
•
Limit movement.
•
Clean hand pulse sensors.
•
May need to wait longer for heart rate to display.
•
Note: The heart rate hand pulse sensors provide an approximate heart rate value. The sensors are not medical devices
and should not be used in any type of medical application.
Warning: Chest strap heart rate reading overrides contact heart rate.
34
M
RODUCT
AINTENANCE
N
W
N
OT
ORKING OR
OT
A
CCURATE