Managing Calls - Advanced Features; Phones; Manually Configuring A Shorephone - ShoreTel 530 User Manual

MANAGING CALLS – ADVANCED FEATURES
In addition to performing the regular functions of placing calls and answering
calls, your phone supports several other advanced functions. If you use any of
these features on a regular basis, you may benefit by having your system
administrator assign the desired function to the custom keys on your phone.
VPN Phones
VPN Phone that provides secure audio communications for
ShorePhones located remotely from ShoreGear switches through open
VPN SSL tunnels. To support VPN phone, ShoreTel provides two VPN
Concentrators capable of supporting up to 100 calls through VPN
tunnels.

Phones

ShorePhones are manually configured to establish a stunnel with the VPN
concentrator. After the phone is configured and placed on a WAN port (such
as the internet) it attempts to communicate with the Concentrator. ShoreWare
does not provide DHCP options for automatically setting these parameter
values at startup.
The following parameters are manually configured on the ShorePhone to
perform VPN calls:
VPN Gateway: This parameter specifies the WAN IP Address of the VPN
•
Concentrator to which the ShorePhone connects. Default value is
0.0.0.0.
VPN Port: This parameter specifies the port number of the VPN
•
Concentrator to which the ShorePhone connects. Default value is 443.
VPN: This parameter, when set to On, enables VPN Phone on the
•
ShorePhone. Default setting is Off.
VPN User Prompt: This parameter, when set to On, programs the
•
ShorePhone to prompt the user for a VPN user name after completing a
power cycle.
VPN Password Prompt: This parameter, when set to On, programs the
•
ShorePhone to prompt the user for a VPN password after completing a
power cycle.
FTP: This parameter specifies the IP Address of the RTP server from
•
which the phone requests VPN Phone software upgrades. When set to
the default value of 0.0.0.0, the phone solicits upgrades from the IP
Address of the VPN Gateway.

Manually Configuring a ShorePhone

To configure the ShorePhone IP phone, perform the following:
Step 1 Press the Mute button, then enter SETUP#
34