AMX Solecis AVS-SL-0201-824 Installation Manual

Overview
The Solecis AVS-SL-0201-824 (FG1330-1113-05) is the perfect solution for all
2x1 PC switching solutions. Designed for permanent installations and rental
companies alike.
The AVS-SL-0201-824 incorporates high resolution switching circuitry for all PC
applications up to UXGA. The AVS-SL-0201-824 can be user set to operate in
either manual, auto, or remote switching modes. The remote options include
control from both RS232 and Contact Closure while Auto modes allow either
priority or last presented input switching.
The outputs are both 75 ohm driven with TTL sync restore for connection to long
cable runs. The audio inputs automatically follow the video input and are
converted to be either balanced or unbalanced signals on the output.
green = currently selected input
Audio Input A
(from PC 1)
Video Input A
(from PC 1)
RS232 and
Contact Closure
FIG. 1
Solecis AVS-SL-0201-824

Product Specifications

Solecis AVS-SL-0201-824 Specifications
RGB Input
Number: 2
Connectors: HD-15
Level: Analog
Max Level: 1V p-p
Impedance: 75 ohm
Sync Input
Level: TTL/Analog
Max Level: 5v p-p
Impedance: 75 ohm
Audio Input
Number: 2
Connectors: 3.5mm stereo
Type: Unbalanced analog
Max Level: 2V p-p
Impedance: 47K ohm
RGB Video Bandwidth: 400MHz -3dB
RGB Return Loss: 45dB@10MHz, -27dB@100MHz
Adjacent Input Crosstalk: 73dB@10MHz, -50dB@100MHz
Audio Response: 20Hz-50KHz
Input A Activity LED
Input B Activity LED
Audio Input B
(from PC 2)
Video Input B
(from PC 2)
Video OUT
Audio OUT
DIP Switches
Solecis
Solecis AVS-SL-0201-824 Specifications (Cont.)
RGB Output
Number:
Connector:
Level:
Gain:
Impedance:
Sync Output
Level:
Impedance:
Audio Output
Number:
Connectors:
Type:
Gain:
(front)
Impedance:
Power
Input Voltage:
Power Consumption:
Dimensions (HWD):
Weight:
Included Accessories:
Certifications:
(rear)
Safety Instructions
Please read these instructions before using your AMX Solecis device. Failure to
comply with these instructions could result in fire, electrical shock, personal injury,
death, or damage to the equipment.
Liquid Spills
Do not set drinks on top of the unit or immerse the unit in liquid.
Do Not Disassemble
This device contains no user serviceable parts. All servicing must be performed by a
qualified service technician.
For Safety Reasons
• Do not place the unit on an unstable surface.
• Do not use near water or sources of heat.
• Use only recommended attachments.
• Use the type of power supply as specified.
Unplug the power to the unit and refer servicing to qualified personnel under the
following conditions:
• If liquid has been spilled or the unit has been exposed to rain or water.
• If it does not operate normally when the operating instructions are followed or if it
exhibits a distinct change in performance indicating a need for service.
• If the unit has been dropped or the cabinet damaged.
Installation
1. Connect one end of the HD-15 cable to the output video socket of the
computer.
2. Connect the other end to the INPUT A socket of the switcher.
3. Repeat for INPUT B.
4. Connect a monitor or projector to the MAIN OUTPUT socket of the
switcher.
5. Connect Audio to the switcher Inputs using a 3.5mm Stereo Jack plug.
6. The output is taken from the captive-wire connector on the Main Output.
Installation Guide
AVS-SL-0201-824
1
HD-15
Analog
Unity
75 ohm
TTL
75 ohm
2 (L/R)
Captive-wire
Balanced/Unbalanced
Unity
600 ohm
9-12VDC
15W
1.66" x 5.85" x 4.25" (42.2 mm x 148.6 mm x 108.0 mm)
• Height includes feet
• Depth includes connectors
1.4 lbs. (0.65kg)
PS2.8 power supply (FG423-11)
• CE
• FCC class B, part 15
• RoHS/WEEE compliant