Mounting The Presentation Switcher - AMX AVX-400 Operation/Reference Manual

The following table lists the pinout configuration for HD-15 connector to Component connectors:
HD-15 to Component Pinouts
VGA Pin
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15

Mounting the Presentation Switcher

The AVX-400 can be mounted onto a flat surface or mounted under a table. Attach the mounting brackets from the
optional mount kit (FG525) to the sides of the switcher as shown in FIG. 26 to mount the unit to any flat surface. FIG. 26
displays the mounting brackets set to attach to the underside of a table. To surface-mount the unit, attach the mounting
brackets with the flat side toward the bottom of the unit.
FIG. 26 AVX-400 presentation switcher with optional mounting brackets.
AVX-400 Enova Twisted Pair Presentation Switcher Operation/Reference Guide
Component Signal
Pr signal
Y signal
Pb signal
Pr - Return
Y - Return
Pb - Return
Wiring and Device Connections
15