2) Start the measurement – Press the ON/OFF button to
start the measurement.
3) During the measurement –The cuff will inflate
automatically. A single measurement will be performed
by each push on the ON/OFF button.
SYS
mmHg
D I A
mmHg
PUL
/min
4) Finishing the measurement – Once the
measurement is complete, the measurement value
is automatically stored for later reference. If an error
displays after the measurements, the process should
be repeated.
5 ) 250 measurements safely stored – The WatchBP O3
AFIB device can store up to 250 single measurements
in «CASUAL» mode.
F
When the memory is full, each new measurement will automatically
overwrite the earliest measurement.
WatchBP O3
21
EN