Sys Op Mode Screen - ZyXEL Communications NBG5615 User Manual

Figure 129 Access Point Mode

24.11 Sys OP Mode Screen

Use this screen to select how you want to use your NBG5615.
Figure 130 Maintenance > Sys OP Mode
The following table describes the labels in the General screen.
Table 83 Maintenance > Sys OP Mode
LABEL
Configuration Mode
Router Mode
NBG5615 User's Guide
DESCRIPTION
Select Router Mode if your device routes traffic between a local network and
another network such as the Internet. This mode offers services such as a firewall
or bandwidth management.
You can configure the IP address settings on your WAN port. Contact your ISP or
system administrator for more information on appropriate settings.
Chapter 24 Maintenance
201