Troubleshooting - Yukon Trail Puma 200 Owner's Manual

TROUBLESHOOTING

Engine will not Start
1. Fuel valve OFF
2. Choke OPEN
3. Out of fuel
4. Bad fuel; engine stored
without treating or draining
gasoline, or refueled with bad
gasoline
5. Spark plug faulty, fouled,
or improperly gapped
6. Spark plug wet with fuel
(flooded engine)
7. Fuel filter clogged,
carburetor malfunction,
ignition malfunction, valves
stuck, etc.
Engine Lacks Power
1. Filter element (s) clogged
2. Bad fuel; engine stored without
treating or draining gasoline, or
refueled with bad gasoline.
3. Fuel filter clogged, carburetor
malfunction, ignition
malfunction , valves stuck, etc.
DO NOT RETURN STORE. For questions regarding assembly and use,
call Customer Service: 877-441-6999.
Move Fuel valve lever to ON.
Move Chock Lever to CLOSED
Refuel
Drain fuel and carburetor.
Refuel with fresh gasoline
Remove and inspect spark plug.
Clean, gap, or replace
Remove and inspect spark plug.
Dry and reinstall spark plug.
Take the engine to a qualified
mechanic. Replace or repair
faulty components as necessary
Check air filter Clean or
replace.
Drain fuel tank and
carburetor. Refuel with fresh
gasoline.
Take engine to a qualified
mechanic. Replace or repair
faulty components as
necessary.