Vehicle Washing - Yukon Trail Puma 200 Owner's Manual

Cleaning the vehicle regularly can slow down the color fading of its
body and make it easier to check if there is any damage and any oil
leakage.
CAUTION
Washing the Mini Bike with over-pressurized water may cause
damage to some of its components. Therefore, do use a pressure
washer to clean the vehicle. The following parts should be
cleaned using low pressure water:
— Wheel hub
— Exhaust pipe
— Fuel tank and lower portion of cushion
— Carburetor
— Head lock and ignition switch
— Meters
1 After pre-wiping, the vehicle should be washed with clean
water to remove dirty residues so as to prevent corrosion.
Plastic subassemblies should be cleaned by wiping with a cloth
or foam soaked in neutral detergent solution, followed by
washing with clean water.
2 After the cleaned vehicle is air dried, grease the chain and
run the engine at idling speed for a few minutes.
3 Prior to driving, carefully check the braking system
repeatedly and repair or adjust it if necessary.
DO NOT RETURN STORE. For questions regarding assembly and use,
call Customer Service: 877-441-6999.

VEHICLE WASHING