Checking & Cleaning The Air Filter - Yukon Trail Puma 200 Owner's Manual

CHECKING & CLEANING THE AIR FILTER
1. Remove seat to access air filter. Seat is removed by
removing nut located under seat (see photo).
2. Locate Air Filter Box under seat and remove cover.
3. Remove air filter.
4. Remove foam cover from Air filter element.
5. Tap the Air filter element gently to remove
most of the dust and dirt. Blow out remaining
dust with compressed air. If the element is
damaged, replace it.
6. Wash the foam element cover per instructions
below then allow to dry thoroughly.
7. Reinstall foam cover to the air filter element.
8. Reinstall air filter and close cover.
CAUTION
The air filter element must be intact or the engine will suck in dust
and dirt, resulting in a shorter service life of the engine.
Water should be prevented from entering into the filter when
washing the vehicle.
The filter element shall be cleaned gently without twisting to
prevent it from cracking. Never wash it with gasoline or any
acid, alkaline or organic volatile oil to avoid its aging, which will
result in reducing the effect of the air filter oil to catch particles
before they enter the engine. Replace the filter element with a
new one if it is broken or cracked.
DO NOT RETURN STORE. For questions regarding assembly and use,
call Customer Service: 877-441-6999.