Engine Starting And Stopping - Yukon Trail Puma 200 Owner's Manual

ENGINE STARTING AND STOPPING

Never start the engine in a closed place as the exhausted
gas from the vehicle contains toxic carbon monoxide.
Starting Engine:
1. Place fuel valve lever to "ON" Position.
2. Place Choke lever to "ON" Position.
3. Set the ignition switch to "
4. Pull the Start Recoil cord until engine starts.
5. After engine has sufficiently warmed up,
place Choke lever in "OFF" Position.
Procedures for stopping engine:
1. Release throttle twist grip to slow down engine.
2. Set the ignition switch to "
Set the fuel valve lever (the fuel tank valve) handle to "OFF"
3.
DO NOT RETURN STORE. For questions regarding assembly and use,
call Customer Service: 877-441-6999.
" Position.
" position.