Table of Contents
Advertisement
Vesa-mount installation
Important:
• Use an arm that is approved by VESA (according to the VESA 100
mm standard).
• Use an arm that can support a weight of at least 10 kg (22.05
lbs).
To attach the panel unit to an arm stand:
Unscrew the 4 screws (M4 x 8 mm) from the rear of the display
1.
panel.
Attach the panel firmly to the arm stand using 4 screws M4 x 10
2.
mm.
Figure 17: : Vesa mount fixation holes
Vesa-mount installation
39
Advertisement
Table of Contents
