Yamaha Vmax VMX17C 2009 Service Manual page 39

1. Push "SELECT" to highlight "Display".
2. Push "RESET"; the following screen is dis-
played.
3. Push "RESET" and the hour digits start flash-
ing.
4. Push "SELECT" to increment the hours.
5. Push "RESET", and the minute digits start
flashing.
6. Push "SELECT" to increment the minutes.
7. Push "RESET" to start the clock.
8. Push "RESET" again to return to the previous
menu.
Resetting all the brightness and shift timing indi-
cator light functions:
This resets ALL settings made to the brightness
and shift timing indicator light functions.
1. Push "SELECT" to highlight "Display".
2. Push "RESET".
3. Push "SELECT" to highlight "All reset".
4. Push "RESET", then push "SELECT" to high-
light "Yes".
5. Push "RESET" to reset the brightness and
shift timing light indicator values to the factory
setting. The display returns to the Normal
mode.
TIP
To perform further multi-function display set-
tings, enter the Select mode again by pushing
and holding "SELECT" and "RESET" for at least
three seconds.
Using the stopwatch
The stopwatch can be activated as follows.
1. Push "SELECT" to highlight "Stopwatch".
1-30
FEATURES