1. Accelerator position sensor
2. Throttle servo motor coupler
3. Sub-wire harness couplers
4. Intake air pressure sensor
5. Throttle position sensor
6. Throttle cable (accelerator cable)
7. Throttle cable (decelerator cable)
8. Injector #2 coupler
9. Injector #1 coupler
10. Negative pressure hose
11. Canister purge hose (California only)
12. Plastic locking tie
13. Plastic band
14. Plastic band (California only)
15. Plastic locking tie (California only)
A. Forward
B. To coolant temperature sensor
C. Make sure that the canister purge hoses are not
pinched between the cylinder head covers and the
throttle valve shafts.
D. Position the plastic locking ties as shown in the
illustration.
E. Position the plastic bands as shown in the
illustration.
2-66
CABLE ROUTING