Yamaha Vmax VMX17C 2009 Service Manual page 240

3
2
New
1
6. Install:
• Oil seal "1"
(with the fork seal driver "2")
Fork seal driver
90890-01502
YM-A0948
ECA14220
NOTICE
Make sure the numbered side of the oil seal
faces up.
TIP
• Before installing the oil seal, lubricate its lips
with lithium-soap-based grease.
• Lubricate the outer surface of the inner tube
with fork oil.
• Before installing the oil seal, cover the top of
the front fork leg with a plastic bag to protect
the oil seal during installation.
2
New 1
7. Install:
• Oil seal clip "1" New
TIP
Adjust the oil seal clip so that it fits into the outer
tube's groove.
8. Install:
• Dust seal "1" New
(with the fork seal driver "2")
Fork seal driver
90890-01502
YM-A0948
2
1
New
9. Fill:
• Front fork leg
(with the specified amount of the recom-
mended fork oil)
Recommended oil
Suspension oil M1
Quantity
915.0 cm³ (30.94 US oz, 32.27
Imp.oz)
ECA14230
NOTICE
• Be sure to use the recommended fork oil.
Other oils may have an adverse effect on
front fork performance.
• When disassembling and assembling the
front fork leg, do not allow any foreign ma-
terial to enter the front fork.
4-75
FRONT FORK