Replacing Staples - Kyocera 6550ci Operation Manual

Replacing Staples

A staple cartridge is installed in the optional document finisher, and center-fold unit.
The document finisher contains staple cartridge holder A.
The optional folding unit contains staple cartridge holders B and C. The refill procedure for staple cartridge
holders B and C are the same as for staple cartridge holder A.
If a message displays indicating that staples have run out, the staple cartridge holder need to be replenished
with staples.
NOTE:
If the Staple Unit runs out of staples, contact your service representative or the place of purchase.
Follow the steps below to refill staples.
Refilling Staple Cartridge Holder A
NOTE:
See page 11-8 to refill staple cartridge holder B/C of the optional folding unit.
1
Open the front cover 1.
2
Remove the staple cartridge holder.
11-7
Maintenance
11