Replacing The Toner Container And Waste Toner Box - Kyocera KM-1635 Operation Manual

Replacing the Toner Container and Waste Toner Box

OPERATION GUIDE
When the Add Toner Indicator on the Operation Panel lights up and the
copier stops, replace the Toner. Replace the Waste Toner Box at the same
time you replace the Toner Container.
• Replenish the Toner only when the Add Toner Indicator lights up or
blinks.
• Whenever the Toner Container is changed, always carry out the
procedures listed from Step 7 on page8-7 through Step 11 on page8-
8. If any section is left dirty, the performance of the product cannot be
maintained.
CAUTION:
toner box. Doing so will generate sparks and may lead to burns.
Do not try to force open or crush the toner container or waste toner
box.
1 Open the front cover.
2
Push the Waste Toner Box holder
to the left and remove the Waste
Toner Box while pushing the
holder.
IMPORTANT: Do not invert the old Waste Toner Box.
WARNING:
of the copier uses high voltage. Exercise caution in handling it to
prevent electric shock.
Do not attempt to incinerate the toner cartridge or waste
The electrically charged section inside the main unit
Maintenance
8-5