1-Sided/2-Sided Selection - Kyocera 6550ci Operation Manual

1-sided/2-sided Selection

Select the type and binding of the original depending on the original.
The table below lists the binding directions for each original type.
1-sided Sheet Original
2-sided Sheet Original
Open Book Original such
as magazine and book
Use the procedure below to select the original type and binding direction when sending scanned originals.
2-sided/Book Original
1-sided
2-sided
Left
Book
Original : A4
Zoom : 100%
Send : A4
Preview
Add Shortcut
Status
Original
1-sided
2-sided
Book
Destination
Right
Top Edge
on Top
Original
Orientation
Cancel OK
10/10/2010 10:10
6-11
Type Binding
—
Binding Left/Right,
Binding Top
Binding Left,
Binding Right
1
Press the Send key.
2
Place the originals on the platen.
3
Press [Org./Sending Data Format] and then [2-
sided/Book Original].
4
Press [1-sided], [2-sided], or [Book].
5
When selecting [2-sided], select the binding
direction and press [Original Orientation] to select
the direction in which the original is set on the
platen.
When selecting [Book], select the binding direction.
6
Press [OK].
7
Specify the destination, and press the Start key to
start sending.
Sending Functions
6