Zoom - Kyocera 6550ci Operation Manual

Zoom

Scans the original by automatically zooming it depending on the sending size.
The table below lists the available options.
Item
100%
Auto
NOTE:
When zooming in or out, see Sending Size Selection on page 6-4 when selecting the sending size.
Depending on the combination of original size and sending size, the image is placed at the edge of the paper.
To select the original size vertically and horizontally on the page, use the centering setting described in
Centering on page 6-7.
Use the procedure below to enlarge or reduce the original to match the transmission size.

Zoom

Enlarge or reduce the original.
[100%]: Produce at actual size.
[Auto]: Enlarge or reduce to match the required size.
Original : A4
Zoom : 100%
:
Send A4
Preview
Add Shortcut
Status
No Zoom (to be scanned at actual size)
Zoomed automatically according to the specified sending size.
Destination
100% Auto
Cancel OK
10/10/2010 10:10
Detail
1
Press the Send key.
2
Place the originals on the platen.
3
Select the transmission size.
4
Press [Advanced Setup] and then [Zoom].
5
Press [100%] or [Auto].
6
Press [OK].
7
Specify the destination, and press the Start key to
start sending.
6-6
Sending Functions