Kyocera 6550ci Operation Manual page 476

Error Message
Cannot process this
job.*
Cannot punch at the
specified position.
Cannot punch this
paper.
Cannot staple at the
specified position.
Cannot staple this
paper.*
Cannot use ##### due
to a failure.
Check the document
processor.
* When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time elapses.
Checkpoints
—
—
Have you selected a
position that cannot be
punched?
Did you select a paper size/
type that cannot be
punched?
Have you selected a
position that cannot be
stapled?
Did you select a paper size/
type that cannot be stapled?
—
Is the document processor
open?
Is the top cover of the
document processor open?
Corrective Actions
Restricted by Authorization settings.
The job is canceled. Press [End].
Restricted by Job Accounting.
The job is canceled. Press [End].
If the selected paper is not changed
and [Continue] is pressed, punch is
released.
Select the available paper. Press
[Continue] to print.
If the selected paper is not changed
and [Continue] is pressed, punch is
released.
Select the available paper. Press
[Continue] to print.
If the selected paper is not changed
and [Continue] is pressed, staple is
released.
Select the available paper. Press
[Continue] to print.
If the selected paper is not changed
and [Continue] is pressed, staple is
released.
Select the available paper. Press
[Continue] to print.
Call service.
Close the document processor.
Close the top cover of the document
processor.
12-10
Troubleshooting
Reference
Page
—
10-20
3-21
3-21
—
—
—
—
—