Kyocera 6550ci Operation Manual page 221

Banner printing
When a document length from 470.1 mm (18.51") to a maximum of 1220.0 mm (48") is specified for printing,
the print job is treated as long document printing. When you execute printing in this case, a message appears
on the machine's operation panel. Place the paper in the multipurpose tray, continue to support it so that it does
not fall, and press [Continue]. To cancel printing, press [Cancel].
NOTE:
When KPDL is used for printer driver emulation, a length setting of 470.5 mm (18.53") or longer is
handled as long print.
Job No.:
Status
IMPORTANT: If an output tray that cannot be used for long document printing such as Mailbox (option) is
selected in the printer driver, the output tray automatically changes to a tray that can be used.
To print on paper that is 164 g/m
and select that type in Media Type in the printer driver before printing. (Refer to Specifying Paper Size and Media
Type for the Multi Purpose Tray on page 2-45, and Paper Weight on page 9-8.
To print on multiple sheets, place each sheet after the previous sheet is printed, and press [Continue].
After pressing [Continue], support the paper with both hands so that it
feeds in correctly.
After printing starts, catch the paper when it is output so that it does
not fall.
Job Name: User Name:
Use MP tray to print on the following paper.
Set paper and press [Continue].
210x800mm Custom 1
Cancel
2
or heavier, register the paper as a custom media type in the system menu,
Continue
10/10/2010 10:10
5-5
Printing
5