Auto Connect; Auto Power On; Auto Power Off - KoamTac KDC100 User Manual

KDC300 User Manual

3.2 Auto Connect

This feature allows the KDC to connect automatically to the host device when the KDC is powered on.
IMPORTANT: Until the host device and KDC have been fully tested, it is strongly recommended that this
feature be Disabled because a host device that does not support this feature can cause problems such as
power loss or upload delays.

3.3 Auto Power On

The Auto Power On option allows the KDC to automatically power on Bluetooth when the SCAN
button is depressed. The default setting is Disabled. NOTE: The host may have to open
the COM port before reconnecting with the KDC.

3.4 Auto Power Off

The Auto Power Off option works in conjunction with the PWR Off Time option. This option allows the KDC
to power off Bluetooth automatically when the KDC is NOT CONNECTED to the host for the time duration
specified in the PWR Off Time option.
The default for this option is Enabled. It is strongly recommended to keep it enabled to maximize the
operation time of the KDC. If Auto Power Off is enabled, Bluetooth can be manually powered off before
specified time in PWR Off Time option.
25