Instructions For Storage - Yukon Trail Puma 200 Owner's Manual

INSTRUCTIONS FOR STORAGE

If the vehicle is not going to be used for a long period of time, for
example, in winter time, some steps should be taken to prevent
malfunction of and damage to its components which might be
caused by long storage. Before storing the vehicle for a long period,
proper maintenance has to be carried in case maintenance is not
completed when the vehicle is put back into use after storage.
1 Change engine oil.
2 Drain off fuel from the fuel tank and carburetor, spray
atomized anti-rust oil onto the inside wall of the tank and then
close the tank. Dispose of any drained fuel properly so as not
to adversely affect the environment.
Gasoline is flammable and may cause fire and even an
explosion under certain conditions. Therefore, do not smoke,
make a fire or have any fire around while draining off fuel.
3. Take out the spark plug, pour about 15-20ml (.5 - .68 oz.) of
clean engine oil into the cylinder, step down on the kick lever
repetitively several times so as to have machine oil
distributed all over the engine and finally fit the spark plug
back on.
4. Wash the vehicle clean, wipe it dry and apply an even coat of
wax to the painted surface and a coat of anti-rust oil on the
chrome-plated surfaces.
5. Inflate the tires as required and put the vehicle up on wooden
blocks with the two wheels clearing the ground.
6. Put the vehicle in a shady and cool place free from humidity
and direct sunlight and cover it properly (not with plastic or
other painted materials). If there is a garage, store it within.
DO NOT RETURN STORE. For questions regarding assembly and use,
call Customer Service: 877-441-6999.