Resumption Of Service After Storage; Table And Torque Of Fasteners - Yukon Trail Puma 200 Owner's Manual

Hide thumbs Also See for Puma 200:
Table of Contents

Advertisement

SERVICE AFTER STORAGE
1. Remove the covering and remove the wooden blocks used in
storing the vehicle. Change the engine oil if the vehicle has been
out of service for over 4 months.
2. Drain off the remaining atomized anti-rust oil from the fuel tank,
followed by filling it with fresh gasoline therein.
3. Prior to driving, all the required check-ups must be made. It is
better to drive it at a low speed in an open area to test its
performance before normal operation.

TABLE AND TORQUE OF FASTENERS

Ser. No.
Fastener
1
Front wheel axle nut
2
Rear wheel axle nut
3
Front Fork Bolts
3
DO NOT RETURN STORE. For questions regarding assembly and use,
call Customer Service: 877-441-6999.
Torque (Newton/m) (Foot/lb)
35-45Nm (26-33 ft.lb.)
50-60Nm (37-44 ft.lb.)
45-47.5Nm (33-35 ft.lb)
2
1

Advertisement

Table of Contents
loading

Table of Contents