Using The External Navigation Unit - Kenwood DDX7015BT Instruction Manual

OTHER EXTERNAL COMPONENTS OTHER EXTERNAL COMPONENTS

Using the external navigation unit

You can connect a navigation unit (KNA-G 630:
optional accessory) to the navigation input terminal
so that you can view the navigation screen.
(Page 66)
• The navigation guidance comes out of the front
speakers even when you listen to an audio source.
Viewing the navigation screen
On the <TOP MENU> screen:
• While the navigation screen is displayed, the touch
panel operations are available only for navigation.
• The aspect ratio of the navigation screen is fixed
to <Full> regardless of the <Aspect> setting
(Page 51).
38
To exit the navigation screen
DDX7015BT/DDX7015BTM
DDX5015DAB/DDX5015BT/
DDX515BT/DDX515BTM
DDX715WBT/DDX715WBTM
Settings for the navigation unit
1
Display the <Input> setting screen.
On the <TOP MENU> screen:
2
Display the <Navigation> screen.
3
<Guidance>* Select which front speakers
are used for the navigation
guidance.
<Volume>*
Adjust the volume of the
navigation guidance. (0 to 35)
<NAV Mute>* Select [ON] to attenuate the
sound coming out of speakers
other than the front speakers
during navigation guidance.
• To cancel the attenuation,
select [OFF].
<NAV Setup> Press [Enter] to display
the setup screen for the
navigation unit. See the
instruction manual supplied
for the navigation unit.
* When an item is grayed out, you cannot change the setting.
To change the settings, select [Unlock] on the <SETUP
Memory> screen. (Page 54)